Slant Six Forum
https://slantsix.org/forum/

will a hyper-pak with headers fit 1971 225 duster with a/c.
https://slantsix.org/forum/viewtopic.php?t=12498		 Page 1 of 1
Author:  Duster_Nova [ Mon Apr 04, 2005 7:05 am ]
Post subject:  will a hyper-pak with headers fit 1971 225 duster with a/c.
Hey! I'm new to this and was hoping to get some questions answered. I was wondering if headers from cliffordperfomance could negotiate the tight spaces in my 225 duster with factory a/c. Also if the hood could close properly if i were to add a hyper-pak with 500 cfm edlebrock. I want to leave the car stock as possible, but also have a little fun with the motor. Please any help would be greatly appreciated!!! Thanks!
Author:  steponmebbbboom [ Mon Apr 04, 2005 2:47 pm ]
Post subject:  Re: will a hyper-pak with headers fit 1971 225 duster with
Quote:
I want to leave the car stock as possible, but also have a little fun with the motor.
You will never get the benefit from the expense of the Hyper-Pak conversion without serious internal engine work. If you are leaving the engine internals as they are, you will probably get more horsepower from a more conservative intake upgrade, like a 2x1bbl offy and Dutra Duals.
Author:  burninsix [ Mon Apr 04, 2005 3:44 pm ]
Post subject: 
I agree with the previous post, if you don't do alot to the engine, it would not really benefit you that much. But if you want to get rid of your Hyper Pak, or know where I can get a hold of one, let me know. I will pay good money for one!!! If you want to trade, I have a offy 4bbl intake.

Burninsix
67 Cuda
Slant Six Powered
12 Seconds At A Time
Author:  Duster_Nova [ Tue Apr 05, 2005 5:57 am ]
Post subject: 
What size cam and other modifications to the engine would be needed to make the hyper-pak operate at full capacity? Also does anyone know where i can purchase a set of original 15 x 7 dodge rally wheels??? I think they look awesome but everyone has them for over $500.
Author:  Duster_Nova [ Tue Apr 05, 2005 6:02 am ]
Post subject: 
Oh yeah and burninsix, i have heard (only heard) that hyper-paks are being sold by clifford performance for around $300. I have also heard that Doctor Dodge aka Doug Dutra is the inventor of these wonderful devices.
Author:  steponmebbbboom [ Tue Apr 05, 2005 10:34 am ]
Post subject: 
Well he didnt invent them, but he did painstakingly recreate the casting dies for them and put a lot of work into bringing them back. He did invent Dutra Duals, which are now appearing at Year One, Layson's etc. I hope he's getting rewarded for that.
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/