Sorry, but who is Gary Goers? I'm sure I should know who he is.
Jerry
| Slant Six Forum https://slantsix.org/forum/ |
|
| Any experience with pourable "rubber" for small pa https://slantsix.org/forum/viewtopic.php?t=12609 |
Page 1 of 1 |
| Author: | '74 Sport [ Wed Apr 13, 2005 6:29 am ] |
| Post subject: | Any experience with pourable "rubber" for small pa |
Mayber rubber isn't the right name, and it's probably some sort of 2-part urethane with catalyst. Regardless, I need to cast a few small "rubber" parts. Anyone know much about this? Jerry |
|
| Author: | SlantSixDan [ Wed Apr 13, 2005 9:25 am ] |
| Post subject: | |
2-part urethane. That's how Gary Goers got started. This book goes into very fine detail on how to do it right. |
|
| Author: | '74 Sport [ Wed Apr 13, 2005 11:40 am ] |
| Post subject: | |
Sorry, but who is Gary Goers? I'm sure I should know who he is. Jerry |
|
| Author: | SlantSixDan [ Wed Apr 13, 2005 3:01 pm ] |
| Post subject: | |
This guy. |
|
| Author: | steponmebbbboom [ Wed Apr 13, 2005 8:08 pm ] |
| Post subject: | |
Dont know what youre casting, but two part latex is also available, it's used in mouldmaking. |
|
| Author: | chi/6er [ Thu Apr 14, 2005 12:29 am ] |
| Post subject: | porable rubber |
74 sport not sure if this is what you are looking for, but .... in my slot car racing days, I used to cast part from resin by a company call alumilite. I used 2 part liquid latex to make a rubber mold. then mixed the 2 part resin and pour in mols to make part...resin harden in 3 minutes.. since I have a hard time getting front turn signal lense for my 73 dart, I decided to try duplicating from my good original lense with this stuff. here is a web site of the product....Jerry http://www.alumilite.com/line.cfm |
|
| Author: | chi/6er [ Thu Apr 14, 2005 12:30 am ] |
| Post subject: | porable rubber |
74 sport not sure if this is what you are looking for, but .... in my slot car racing days, I used to cast part from resin by a company call alumilite. I used 2 part liquid latex to make a rubber mold. then mixed the 2 part resin and pour in mols to make part...resin harden in 3 minutes.. since I have a hard time getting front turn signal lense for my 73 dart, I decided to try duplicating from my good original lense with this stuff. here is a web site of the product....Jerry http://www.alumilite.com/line.cfm |
|
| Author: | chi/6er [ Thu Apr 14, 2005 12:31 am ] |
| Post subject: | porable rubber |
74 sport not sure if this is what you are looking for, but .... in my slot car racing days, I used to cast part from resin by a company call alumilite. I used 2 part liquid latex to make a rubber mold. then mixed the 2 part resin and pour in mols to make part...resin harden in 3 minutes.. since I have a hard time getting front turn signal lense for my 73 dart, I decided to try duplicating from my good original lense with this stuff. here is a web site of the product....Jerry http://www.alumilite.com/line.cfm |
|
| Author: | '74 Sport [ Thu Apr 14, 2005 7:29 am ] |
| Post subject: | |
Thanks for replies. Great stuff found on the Alumilite web site. Think that will serve my purpose. If so, I'll show you what I am working on. Jerry |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|