Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Jan 27, 2025 12:58 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: ERG block off
PostPosted: Mon May 02, 2005 8:20 am 
Offline
1 BBL (New)

Joined: Fri Apr 15, 2005 12:08 pm
Posts: 6
Car Model:
What will I gain by blocking off the ERG with a ERG block off plate? I saw the part on ebay for 12.50. I know my truck still has the ERG on it and I was wondering if this would be a good change?


Top
   
 Post subject: What will it do
PostPosted: Mon May 02, 2005 8:37 am 
Offline
Board Sponsor

Joined: Tue Jul 27, 2004 9:27 am
Posts: 824
Location: Pittsburgh, PA
Car Model:
If your egr is leaking or stuck in the open position, it can cause performance problems. Without spending a dime, you can rotate the existing egr 180 degrees to block off it's operation.

Removing a properly functioning EGR will not be of benifit. EGR is designed to prevent engine knock due to low octane, and will allow less fuel to be burned during light engine load. (all in theory of course)

At wide open throttle, the EGR should close and allow for full power.

Save your money for something else. That's my 2 cents.

_________________
1980 Aspen 225 super six
Image


Top
   
 Post subject:
PostPosted: Mon May 02, 2005 8:38 am 
Offline
1 BBL (New)
User avatar

Joined: Sat Apr 23, 2005 11:21 pm
Posts: 7
Car Model:
what's a erg ?


Top
   
 Post subject:
PostPosted: Mon May 02, 2005 8:41 am 
Offline
1 BBL (New)

Joined: Fri Apr 15, 2005 12:08 pm
Posts: 6
Car Model:
Man I am glad there are spell checkers out there like cudaman1973.

EGR


Top
   
 Post subject:
PostPosted: Mon May 02, 2005 8:44 am 
Offline
1 BBL (New)

Joined: Fri Apr 15, 2005 12:08 pm
Posts: 6
Car Model:
Thanks for the reply Slant6Ram. Sounds like I Should leave it alone.


Top
   
 Post subject:
PostPosted: Mon May 02, 2005 11:41 am 
Offline
Turbo EFI
User avatar

Joined: Tue Mar 11, 2003 5:09 am
Posts: 1167
Location: Troy, Texas
Car Model:
If you decide to remove it later, do like I did and make a block-off out of a thin piece of plate aluminum, using the base of the EGR as a template.

Jerry

_________________
There's a difference between ignorance and stupidity.
Ignorance is not knowing any better.
Stupidity is knowing, yet doing it anyway.


Top
   
 Post subject:
PostPosted: Mon May 02, 2005 1:43 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24500
Location: North America
Car Model:
Ram's right...as long as the EGR system is well designed and working properly. The problem with most of these '70s EGR systems is that they were a desperation "get it past the Federal emission certification test" measure. They're very primitive and even when working as designed, tend to overdo it on admission of exhaust gas into the intake tract, which really can negatively affect driveability and part-throttle performance.

Modern computerised modulated EGR systems can indeed improve driveability, but they're a far cry from what's on any Slant-6 with EGR.


Top
   
 Post subject:
PostPosted: Mon May 02, 2005 3:34 pm 
Offline
TBI Slant 6
User avatar

Joined: Mon Nov 01, 2004 11:43 pm
Posts: 107
Location: Surprise,Az
Car Model:
i got a aluminum plate of ebay to block my EGR valve. i t looks good but i didnt really notice a differance


Top
   
 Post subject:
PostPosted: Tue May 03, 2005 7:50 pm 
Offline
3 Deuce Weber

Joined: Mon Mar 01, 2004 12:02 am
Posts: 73
Location: Charlotte, NC
Car Model:
i jsut cut one out of a piece of scrap steel i had laying around. i just didn't feel like messing with emmisions stuff on this engine. YOu can see it in this picture.

Nick

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Semrush [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited