Toyota V6, from a Camry!
| Slant Six Forum https://slantsix.org/forum/ |
|
| Fuel injection euro style. https://slantsix.org/forum/viewtopic.php?t=13311 |
Page 1 of 1 |
| Author: | tgbg [ Thu Jun 09, 2005 4:45 am ] |
| Post subject: | Fuel injection euro style. |
I am just starting to rebuild a 225 for my -63 Dart. I have been reading on fuelinjection but have not found any info on suitable systems from european cars. As the chevy system that was recommended in an article is not available here in sweden (VERY few such in our junkyards) I was looking for a system that is more common in europe. Anyone has any ideas what to look for? |
|
| Author: | SlantSixDan [ Thu Jun 09, 2005 6:26 am ] |
| Post subject: | |
How about K-Jetronic from a 2.8-litre V6 Volvo 260 or 760? |
|
| Author: | argentina-slantsixer [ Thu Jun 09, 2005 6:26 am ] |
| Post subject: | |
What about porsche's boxer motor that equipped 911s? that engine is close in displacement to the slant... it revs the living crap outta the slant but the displacement is similar. |
|
| Author: | Rust collector [ Fri Jun 10, 2005 10:14 am ] |
| Post subject: | |
bmw? |
|
| Author: | skraecken [ Sat Jun 11, 2005 8:46 am ] |
| Post subject: | |
| Toyota V6, from a Camry! |
|
| Author: | tgbg [ Sat Jun 11, 2005 4:57 pm ] |
| Post subject: | |
Thanks for the input. The K-Jetronic seems to be an easy system as to adapting it to the/6. My plans changed a bit today, I'm still going for fuelinjection but now I also plan to put a turbo on it. A friend has wrecked his Volvo 850 and I got the turbo of it for free. |
|
| Author: | Doctor Dodge [ Sun Jun 12, 2005 8:03 am ] |
| Post subject: | |
   DD |
|
| Author: | Pierre [ Sun Jun 12, 2005 10:43 am ] |
| Post subject: | |
Remember you can always piece together a system from various parts you have access to then make the whole system run with a megasquirt |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|