| Slant Six Forum https://slantsix.org/forum/ |
|
| early carb on late manifold https://slantsix.org/forum/viewtopic.php?t=13339 |
Page 1 of 1 |
| Author: | soulsurfer [ Sun Jun 12, 2005 7:02 pm ] |
| Post subject: | early carb on late manifold |
Hi - Is it possible to bolt on an early Holley 1 bbl carb (without all the vacuum hoses) on a early 80's Slant 6 manifold (which had the later Holley 1 bbl with all the vacuum hoses. Our carb is sucking gas like crazy and anyway - we would also like a cleaner look under the hood (the engine is in a rat rod). Thanks! Glen |
|
| Author: | SlantSixDan [ Mon Jun 13, 2005 7:53 am ] |
| Post subject: | |
The only thing you need to watch out for is that the early carbs require a manifold with a separate 9/32" hole next to the throttle bore, for the PCV. Some of the later manifolds don't have this hole. If yours does, then go right ahead. |
|
| Author: | soulsurfer [ Mon Jun 13, 2005 6:40 pm ] |
| Post subject: | |
Thanks for the tip! I will check the manifold out and see what to do from there. Cheers, S |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|