Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Feb 28, 2025 2:29 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
 Post subject: low/reverse band
PostPosted: Tue Jul 05, 2005 11:50 pm 
Offline
EFI Slant 6

Joined: Tue Jun 03, 2003 9:42 pm
Posts: 358
Location: San Diego, California
Car Model:
I tore apart my 65 904 - the goal being to check it out and put new seals in it and swapping the valve body with a 63 so it all can be installed later in
a pushbutton 61 valiant. Everything looks good inside except the low/reverse band and the drum it rides on - it looks like they were
slipping to the point of burning. Of course the rebuild kit does not include
this band - Is this part readily available? And what years interchange?
I did not see it on quick searches of partsamerica and autozone.
How can I tell if the drum needs to be
replaced or just cleaned? Thanks for your help.


Top
   
PostPosted: Wed Jul 06, 2005 2:08 pm 
Offline
EFI Slant 6

Joined: Tue Jun 03, 2003 9:42 pm
Posts: 358
Location: San Diego, California
Car Model:
I just had an idea - all these trans kit descriptions claim the rear
(low/reverse) band is not included because it does not wear out
in normal use. So when I tear down the '63 to grab the valve body
- I will look at the rear band and drum to see if they are in good
enough shape to reuse when rebuilding the '65.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot] and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited