| Slant Six Forum https://slantsix.org/forum/ |
|
| My slant could use a little more power https://slantsix.org/forum/viewtopic.php?t=13574 |
Page 1 of 1 |
| Author: | rallye72 [ Mon Jul 04, 2005 6:14 pm ] |
| Post subject: | My slant could use a little more power |
I have a 225 1 bbl in my 76 swinger and I plan on rebuilding it this winter. I'm leaving it with the stock carb and intake with the stock exhaust manifold. When I rebuild it I want the engine to be pretty much factory but a tiny bit more cam.I was wondering what would be a replacement camshaft? I'll have a 3 angle valve job done and will probably gasket match the intake to head. I'm not looking for a race car, ricer flybys don't bother me none. Just want the most performance from a factory dependable, good gas millaged slant 6. Any other tips would be great! Thanks. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|