| Slant Six Forum https://slantsix.org/forum/ |
|
| 7 1/4 suregrip?? https://slantsix.org/forum/viewtopic.php?t=14378 |
Page 1 of 1 |
| Author: | plybelvedere57 [ Wed Sep 14, 2005 4:55 pm ] |
| Post subject: | 7 1/4 suregrip?? |
Hi everyone, I'm new hear. I have a question, I'm looking for a suregrip for my 71 dart swinger is one available as oem or any aftermarket? I cannot seem to find anything about this. any help will be greatly appriciated. Thanks in advance Brian |
|
| Author: | Charrlie_S [ Wed Sep 14, 2005 7:46 pm ] |
| Post subject: | |
The 7 1/4 rear had a sure grip option from the factory. There is no aftermarket unit as far as I know. The only way to get one is to keep checking the "Mopar" buy/sell/swap ads, E-bay, and salvage yards. They are few and far between, but do show up once in awhile. The last one I got, took 2 years of looking. PS: they came in the clutch type and also the cone type, just like the other mopar suregrips. |
|
| Author: | Greg Ondayko [ Fri Sep 16, 2005 9:02 pm ] |
| Post subject: | |
7 1/4" Sure Grips are Very Rare - Only in early a bodies - is where I have enclontered them. Late 60's and on no sure grip 7 1/4"s were produced - you had the order the 8 1/4" or 8 3/4" That is the best of my knowledge Greg |
|
| Author: | Charrlie_S [ Sat Sep 17, 2005 6:59 am ] |
| Post subject: | |
Beg to differ, Greg. I have a 7 1/4 sure grip on the shelf, that came out of a 76 duster. I am not sure of the years, but the early units were the clutch type, and the later units were the cone type. They changed just about the same time as the 8 3/4 units changed. PS: I have a 3.91 SG 7 1/4 rear, a 5.13 SG 7 1/4 rear. Both are clutch type. Have a cone type on the shelf, along with a clutch rebuild kit. There are some out there, but you have to keep looking. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|