| Slant Six Forum https://slantsix.org/forum/ |
|
| 3-Speed Linkage bushings/grommets https://slantsix.org/forum/viewtopic.php?t=14411 |
Page 1 of 1 |
| Author: | 66bcuda [ Sat Sep 17, 2005 11:54 am ] |
| Post subject: | 3-Speed Linkage bushings/grommets |
I'm looking for a source for the rubber grommets and bushings that go on transmission end of the linkages. I've called the dealer and checked year one and hemmings.... Any ideas? Thanks, Steve |
|
| Author: | makapip [ Sat Sep 17, 2005 2:56 pm ] |
| Post subject: | bushing for linkage |
about 3 years ago i ordered the automatic linkage bushings grommet as the dealer calls it. i noticed only one parts person was willing to look in the book for the part number to order it. when i call in to different parts person they say no longer available. Maybe try calling another dealer parts department. |
|
| Author: | 66bcuda [ Sat Sep 17, 2005 5:27 pm ] |
| Post subject: | grommets and bushing... |
so, would you happen to know the mopar number for these parts? It's on of the few parts in the factory manual that doesn't show a part number next to it..... Thanks for the reply, Steve |
|
| Author: | 65dart [ Sun Sep 18, 2005 9:18 pm ] |
| Post subject: | |
Call Greg Rairdon Dodge-Chrysler-Jeep: Parts Department at (360) 653-2300 16610 Smokey Point Blvd Arlington, WA 98223 If the part is listed in any factory parts book they have it and will look it up and if asked will even tell you which dealers in the country still stock the part NOS. These guys are a gold mine. Be aware though that only one guy knows the books so he may not be in the office when you call. |
|
| Author: | 66bcuda [ Mon Sep 19, 2005 9:21 am ] |
| Post subject: | grommets and bushings |
wow...very cool! thanks a lot!. Steve |
|
| Author: | 66bcuda [ Tue Sep 20, 2005 1:03 pm ] |
| Post subject: | Found!!! |
you folks just ROCK! it turns out that they are no longer made..(duhh) but many dealer DO have them in stock. The Bushings is 16-76-200 = .85 ea (SHEESH!) The Grommet is 19-41-699 = $2.50 ea (very cool) and I spoke with Mike at the Rairdon dealership in Washington, he was VERY helpfull Steve |
|
| Author: | 65dart [ Tue Sep 20, 2005 1:10 pm ] |
| Post subject: | |
Glad to hear they worked for you. They've always bent over to help me. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|