Should be the same Lou.
| Slant Six Forum https://slantsix.org/forum/ |
|
| 904 torque converter - Slant vs. V8 https://slantsix.org/forum/viewtopic.php?t=14469 |
Page 1 of 1 |
| Author: | Dart270 [ Thu Sep 22, 2005 8:52 am ] |
| Post subject: | 904 torque converter - Slant vs. V8 |
Hey Folks, If I have a TC that fits a 68-up Slant 6 904, will it fit the V8 904 also? I want to sell an 11" TC. I guess the ring gear would be the only difference. Thanks, Lou |
|
| Author: | slantzilla [ Thu Sep 22, 2005 9:53 am ] |
| Post subject: | |
Should be the same Lou.
|
|
| Author: | Dart270 [ Thu Sep 22, 2005 10:42 am ] |
| Post subject: | |
Thanks Dennis. Trying to clean out my garage and get the most $$ for my parts! Lou |
|
| Author: | slantzilla [ Thu Sep 22, 2005 12:05 pm ] |
| Post subject: | |
Good luck with that Lou. I'm cleaning mine out for the house to close next Friday.
|
|
| Author: | Dart270 [ Thu Sep 22, 2005 1:41 pm ] |
| Post subject: | |
Best of luck with that moving thang. A much bigger project than mine! Lou |
|
| Author: | slantzilla [ Thu Sep 22, 2005 2:06 pm ] |
| Post subject: | |
I've already moved myself. This is just the crap out of the garage that didn't have to go until the house sold. It's amazing how much crap you can gather up in 10 years.
|
|
| Author: | Slant6Ram [ Fri Sep 23, 2005 6:41 am ] |
| Post subject: | I could never move. |
Quote: It's amazing how much crap you can gather up in 10 years.
I've only been seriously collecting slant six parts for about a year, and my garage is bursting at the seams. Worst part is that it's a lot easier to collect crapola than really good stuff.  5 motors (mostly cores) 3 transmissions 2 sets of fenders, set of 77 doors Seats, wiper stuff, rads, a/c parts starters, alts, A big pile of distributors for recurving, several extra cyclinder heads in various stages of porting, rear end and several sets of different gears, Buckets of brake parts, You get the idea, it's a couple of truckloads of stuff without the motors and body parts. I hope I never drop dead and leave my wife stuck with trying to figure out how to clean all this stuff up. It takes a couple of hours just to clear enough space to pull the car in, and my garage is my whole basement.
|
|
| Author: | Dart270 [ Fri Sep 23, 2005 7:16 am ] |
| Post subject: | |
I have taken to getting rid of anything I don't think I'll use in the next few years, or that I haven't used in the last 5-10 yrs. Parts can be converted into money or space, both of which I can use NOW. Lou |
|
| Author: | emsvitil [ Fri Sep 23, 2005 12:54 pm ] |
| Post subject: | |
Quote: I have taken to getting rid of anything I don't think I'll use in the next few years, or that I haven't used in the last 5-10 yrs. Parts can be converted into money or space, both of which I can use NOW.
But just think how much it will cost you when you do need that part................Lou 
|
|
| Author: | Slant6Ram [ Fri Sep 23, 2005 1:43 pm ] |
| Post subject: | Too much stuff! |
If I can ever find it at the bottom of this pile of @#%@* 
|
|
| Author: | Dart270 [ Fri Sep 23, 2005 2:33 pm ] |
| Post subject: | |
You don't know how many parts I have... I have changed my thinking to some extent, mostly because of the internet. Also, I'm also modifying things and some stock parts I know I'll never want to use again (like 9" drums, or an 11" converter). Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|