| Slant Six Forum https://slantsix.org/forum/ |
|
| driveshaft length for a-904 to 8.75 https://slantsix.org/forum/viewtopic.php?t=14503 |
Page 1 of 1 |
| Author: | 73ScampSSS [ Sun Sep 25, 2005 10:06 pm ] |
| Post subject: | driveshaft length for a-904 to 8.75 |
Hi, I went from a 7.25 rear to a 8.75. I was wondering if anyone has done this and knows the correct driveshaft length when coming from an a-904. Also, is the pinion angle something that is built into the housing, or something that is adjusted with shims between the spring perches? I remember seeing something about it, possibly in a topic or a Mopar Muscle article. The rear I have is supposedly out of a 68 Dart so I don't have to change anything to mount it up. |
|
| Author: | mcnoople [ Mon Sep 26, 2005 3:08 pm ] |
| Post subject: | |
use the search feature please many posts And yes you will have to change something the u-bolts are different. |
|
| Author: | 65 dartman [ Mon Sep 26, 2005 4:09 pm ] |
| Post subject: | |
Don't forget the shock plates |
|
| Author: | sick6 [ Tue Sep 27, 2005 12:10 pm ] |
| Post subject: | |
shorten by some where between 1.75 and 2.25. you will find posts supporting each measurement. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|