| Slant Six Forum https://slantsix.org/forum/ |
|
| Ignition switch ign1 ign2 1965 Valiant https://slantsix.org/forum/viewtopic.php?t=14558 |
Page 1 of 1 |
| Author: | phogroian [ Fri Sep 30, 2005 4:10 am ] |
| Post subject: | Ignition switch ign1 ign2 1965 Valiant |
The ignition switch died on my '65 Valiant, and I removed the electrical plug that connected to the switch (to start the car on a temporary basis). There was a positive lead, and leads for Acc, ign1, ign2, and starter. I tied together the ign1, ign2, and acc, and applied power, then temporarily applied power to the starter lead to start the car. It ran, but seemed a little rough, but when I experimented by disconnecting the ign2 lead, the car ran better. What does the ign2 lead run to? Is it OK to run the car with it disconnected? |
|
| Author: | emsvitil [ Fri Sep 30, 2005 1:09 pm ] |
| Post subject: | Pm |
Check your messages....... |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|