I finally got around to making a dolly so I wouldn't have to keep tripping over the slant that I have sitting out in the shop.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Motor Dolly https://slantsix.org/forum/viewtopic.php?t=14568 |
Page 1 of 1 |
| Author: | andyf [ Fri Sep 30, 2005 11:06 pm ] |
| Post subject: | Motor Dolly |
I finally got around to making a dolly so I wouldn't have to keep tripping over the slant that I have sitting out in the shop.
|
|
| Author: | Walter Lee Jackson [ Sat Oct 01, 2005 12:41 am ] |
| Post subject: | Motor Dolly |
What would you sell one for? --Walt Jackson '63 Dodge Dart GT convertible. |
|
| Author: | Rust collector [ Sat Oct 01, 2005 10:36 am ] |
| Post subject: | |
Nice 
|
|
| Author: | GTS225 [ Sat Oct 01, 2005 6:57 pm ] |
| Post subject: | |
Looks pretty darn good. You wouldn't happen to have a pic of the other side engine mount, would you? I'm curious to see what you did for having to wrap over the oil pan rail. I built a three-wheel one awhile back, and used engine brackets for mine. It's kinda rough and hacked together, but it does work. Roger |
|
| Author: | andyf [ Wed Oct 05, 2005 9:33 am ] |
| Post subject: | |
I'll take a picture of the other side. It has to be two pieces so you can lower the engine into it straight down so it is a little more complicated. Walter - I haven't really considered making more of them. I suppose if I did they would cost the same as the other motor dollies that I make. If I did make these as a product I would change the design so that the rear brace bolts to the back of the engine rather than the tranny. Most people would prefer to just move an engine around. www.arengineering.com |
|
| Author: | andyf [ Sun Oct 16, 2005 8:02 pm ] |
| Post subject: | |
I snapped a picture of the other side. This picture also shows the low mount alternator kit that I just designed. It uses the popular 10si alternator which comes in a variety of amp ratings. I think this one is a 60 amp version. 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|