| Slant Six Forum https://slantsix.org/forum/ |
|
| Summit https://slantsix.org/forum/viewtopic.php?t=14810 |
Page 1 of 1 |
| Author: | 1966 dart wagon [ Mon Oct 24, 2005 4:13 pm ] |
| Post subject: | Summit |
I was searching summit some more and i searched specifically for the inline six, blah blah blah, anyways i have found a whole lot more \6 parts. This includes pistons - 20,30,60 and 80  over with rings 9.99 each Also mech lifters, and i was searching earlier and found pushrods you can cut to your length.
|
|
| Author: | Dart270 [ Tue Oct 25, 2005 6:30 am ] |
| Post subject: | |
Very cool! I had no idea Summit had that stuff. Some of those Erson Cams look pretty nice and a great deal. Lou |
|
| Author: | sick6 [ Tue Oct 25, 2005 1:58 pm ] |
| Post subject: | |
PAW has a ton of stuff too. catalog is spendy though. |
|
| Author: | featherduster76 [ Wed Mar 15, 2006 1:51 pm ] |
| Post subject: | summit =great! |
I found several items for my slant 6 through summit. Hard to believe they have as much for a slant six as they do! Over half of my hop up parts came from them!! Good service to! Threw me in a free hat to! But they should have as much cash as I've laid down on them
|
|
| Author: | emsvitil [ Wed Mar 15, 2006 3:31 pm ] |
| Post subject: | |
not everything shows up at summit with their online catalog and normal searching procedures.......... Often you need to search on a manufacturers part number (summit usually prefixes a manufacturers part number with 3 letters, look at how they do it and you'll get the idea). So figure out what you need, then see if they have it............ |
|
| Author: | Jeb [ Wed Mar 15, 2006 6:06 pm ] |
| Post subject: | |
Summit is WAY better than Jeg's, which seemed to be obssesed with Chivvys and 5.0 Moostangs. |
|
| Author: | GuyLR [ Thu Mar 16, 2006 7:39 am ] |
| Post subject: | |
Summit is really good about fast shipping too. Jeg's isn't too bad on that either but doesn't have the Mopar selection of Summit. |
|
| Author: | sixinthehead [ Thu Mar 16, 2006 1:02 pm ] |
| Post subject: | |
I actually had my first bad experience with Summit the other day. Called up to see what they had for front struts on my GTS, and got stuck talking to Ravishing Rick Rude*, apparently. I asked him how the calibration of the GR2 compared to the Gas-Adjust, but he answered as though talking to a 5-yr old and then hung up on me! *Actually, that's probably an insult to Mr. Rude, who could probably turn me into cream corn if he wanted to. Anyway, they're usually very good to deal with, and prompt too. |
|
| Author: | Slant440 [ Tue Mar 28, 2006 7:16 am ] |
| Post subject: | |
I have been doing a lot of searching for /6 stuff on summit for awhile. I found a set of headers for it finally. But they didn't give any specs as to what it would be used for. Obviously the /6 but I don't know if it could work in my Dodge D150 pickup. I am really tempted to buy it but I need more info on it. |
|
| Author: | Highway [ Mon Aug 07, 2006 8:25 am ] |
| Post subject: | |
Quote: I have been doing a lot of searching for /6 stuff on summit for awhile. I found a set of headers for it finally. But they didn't give any specs as to what it would be used for. Obviously the /6 but I don't know if it could work in my Dodge D150 pickup. I am really tempted to buy it but I need more info on it.
440, let me know where you find a set. I'm looking also, sorry Doug. I would like to get a set of 6 to 1's but would settle for the 3x2's. Just can't afford the Dutra duels right now.
|
|
| Author: | Joel Williams [ Sat Aug 12, 2006 5:30 am ] |
| Post subject: | |
Quote: Quote: I have been doing a lot of searching for /6 stuff on summit for awhile. I found a set of headers for it finally. But they didn't give any specs as to what it would be used for. Obviously the /6 but I don't know if it could work in my Dodge D150 pickup. I am really tempted to buy it but I need more info on it.
440, let me know where you find a set. I'm looking also, sorry Doug. I would like to get a set of 6 to 1's but would settle for the 3x2's. Just can't afford the Dutra duels right now.Ditto that, I need a set for my 81 D150 too. ALready got the intake and carb ready. |
|
| Author: | /6challenger [ Sat Jul 19, 2008 9:39 am ] |
| Post subject: | summit |
I got a set from summit for my 70 challenger and they worked great.. 
|
|
| Author: | Greg Ondayko [ Sat Jul 19, 2008 10:35 am ] |
| Post subject: | Re: summit |
Quote: I got a set from summit for my 70 challenger and they worked great..
Hey challanger What brand are they??Greg |
|
| Author: | /6challenger [ Mon Jul 21, 2008 12:40 pm ] |
| Post subject: | Summit Hooker Headers /6 |
This is the set i have on my /6 Challenger Brand: Hooker Headers Product Line: Hooker Super Competition Headers Part Type: Headers Part Number: HOK-5602HKR Header Material: Steel Header Finish: Painted Header Style: 6-2 style Primary Tube Diameter (in): 1 5/8 in. Collector Attachment: 3-bolt flange Collector Diameter: 2.500 in. Tuned: Yes Primary Tube Length (in): 40 in. Primary Tube Gauge: 18-gauge Flange Style: Standard Flange Thickness (in): 5/16 in. Bolts/Studs Included: Yes Gaskets Included: Yes Reducers Included: No Y-Pipe Included: No Quantity: Sold as a pair. Headers, Super Competition, 6-2, Steel, Painted, Dodge/Plymouth, 198/225, L6, Pair $449.95 |
|
| Author: | Crazy Dart [ Sat Aug 02, 2008 7:53 pm ] |
| Post subject: | |
I got a set of the Hooker Headers from Summit for my 67 Dart and they work great |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|