...YOU SHOULDN'T HAVE TOO MUCH TROUBLE FINDING ONE OF THOSE
D/W
| Slant Six Forum https://slantsix.org/forum/ |
|
| Slant Six https://slantsix.org/forum/viewtopic.php?t=14889 |
Page 1 of 1 |
| Author: | JOHN MAYBERRY [ Tue Nov 01, 2005 7:44 pm ] |
| Post subject: | Slant Six |
I'M LOOKING FOR A 225 FORGED CRANKSHAFT. |
|
| Author: | Dennis Weaver [ Tue Nov 01, 2005 8:06 pm ] |
| Post subject: | |
...YOU SHOULDN'T HAVE TOO MUCH TROUBLE FINDING ONE OF THOSE D/W |
|
| Author: | DusterIdiot [ Tue Nov 01, 2005 8:45 pm ] |
| Post subject: | What year?!?!? |
What year/ size of crank pocket? Pre-68 (small pocket) 1968-1976 (large pocket) -D.Idiot Try 'parts wanted', or go to your local auto parts store and order a crank kit... |
|
| Author: | Dart270 [ Wed Nov 02, 2005 6:40 am ] |
| Post subject: | |
John, Good to see you around here and nice meeting you at the Nats this year. I had the green 64 Dart 4dr running mid 14s. Have you called the Coxes? Lou |
|
| Author: | slantzilla [ Wed Nov 02, 2005 8:18 am ] |
| Post subject: | |
Are you wanting a drop-in or a regrindable core? The crank and bearing kit in my motor came from Carquest. It was right around $200. 
|
|
| Author: | GTS225 [ Wed Nov 02, 2005 3:13 pm ] |
| Post subject: | |
Maybe we should be asking a question or two first. Exactly why are you looking for a forged crank, John? Do you need to replace one that's bad? Do you want to put a forged crank into a '76+ vintage engine? Roger |
|
| Author: | Dart270 [ Wed Nov 02, 2005 6:04 pm ] |
| Post subject: | |
John is a long-time Slant racer near Columbus, OH and a cool guy. Tell us what you're up to, John! Lou |
|
| Author: | VDART [ Wed Nov 02, 2005 6:48 pm ] |
| Post subject: | |
Hey not to hi-jack-- but did Carquest warranty your crank kit zilla??-- just had to ask!! |
|
| Author: | relic-lover [ Wed Nov 02, 2005 7:53 pm ] |
| Post subject: | 63 225 crank core |
I have a 225 crank from a 63 standing in the corner of the garage. Been there for 8 years now - still covered in plastic. The previous owner of my 63 dart gave me the original engine but without the block (a water jacket was cracked). I have no idea what condition it is in - probably a cuttable core. The price is right - yours for the hauling. If you will be in or about San Diego, CA send me a PM |
|
| Author: | slantzilla [ Wed Nov 02, 2005 9:47 pm ] |
| Post subject: | |
Quote: Hey not to hi-jack-- but did Carquest warranty your crank kit zilla??--
There is nothing wrong with the bottom end. just had to ask!! I bet NAPA frowns on warranteeing the piston though.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|