Slant Six Forum
https://slantsix.org/forum/

Degree Wheel for Slant Six?
https://slantsix.org/forum/viewtopic.php?t=14942
Page 1 of 1

Author:  bwhitejr [ Mon Nov 07, 2005 9:20 am ]
Post subject:  Degree Wheel for Slant Six?

I just tried to use the Crane Cams Degree wheel and found that it wouldn't mount to my crank at all. My crank has a 2.25" crank bolt and a 3/4" bolt, so no go there, and the harmonic balancer holes don't line up either. Is there a dgree wheel that can be used with a Slant Six?

Thanks,

bwhitejr

Author:  Greg Ondayko [ Thu Nov 10, 2005 12:27 pm ]
Post subject: 

I Used a Mopar performance degree wheel, and a big bolt from a 318 harm. Balancer. I use washers to shim it - it dosent go over the cam snout but in front.

Greg

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/