Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 3:42 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 14 posts ] 
Author Message
PostPosted: Sun Oct 23, 2005 6:06 pm 
Offline
TBI Slant 6

Joined: Sun Mar 28, 2004 2:48 pm
Posts: 207
Location: Phoenix, Arizona
Car Model:
If I convert a 1963 225 cu inch engine to hydraulic lifters, will the original valve cover clear the rockers?

I notice that original hydraulic lifter engines use a valve cover that is squared off and not canted like early valve covers. Does this signal clearance problems upon conversion? If so, does anyone have any recommendation for solving the clearance problems?

If I've read the prior posts on this board correctly, all that's necessary for the conversion is the hydraulic cam, lifters, pushrods and rocker arm assembly. Am I missing anything?

Would the conversion benefit from the high output oil pump?

Any experience with the Clifford 254 Duration Hydraulic Camshaft?

TIA

--Walt Jackson
--1962 Dodge Dart GT convertible


Top
   
PostPosted: Sun Oct 23, 2005 7:44 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Quote:
If I convert a 1963 225 cu inch engine to hydraulic lifters, will the original valve cover clear the rockers?
Good question. Don't know. Can't imagine wanting to do such a conversion!
Quote:
If I've read the prior posts on this board correctly, all that's necessary for the conversion is the hydraulic cam, lifters, pushrods and rocker arm assembly. Am I missing anything?
A way to feed enough oil to the hydro lifters. Grooving the rearmost cam journal can take care of this.
Quote:
Would the conversion benefit from the high output oil pump?
A regular oil pump in good condition, in an engine in good condition, should be adequate. Still can't imagine wanting to do this conversion, though.
Quote:
Any experience with the Clifford 254 Duration Hydraulic Camshaft?
No, but enough experience with Clifford's business practices not to care how any particular part they offer might work.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Oct 24, 2005 7:49 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14984
Location: Park Forest, Illinoisy
Car Model: 78 Volare
Walter, The valve cover itself is a different shape to fit the hydraulic head. If you used a standard head, the standard cover should still work.

I would put the high output pump on just to make sure the rockers get enough oil. They pump the lifters up by sending the oil down the pushrods to them. Dan is right, the rear cam bearing has a groove in it on hydro motors. I tried to get a grooved bearing when I did my motor, but they appeared to be unavailable now.

No experiance with that particular Clifford. :shock:

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Mon Oct 24, 2005 1:09 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
Dennis, I don't know for sure, never worked on a hydro motor, but I think the groove in on the rear cam journal, not in the bearing. Can anyone confirm this, for sure?

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Mon Oct 24, 2005 1:42 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Factory hydraulic slants use a different rear cam bearing.

The "groove the rear cam journal" thing is for retrofitting earlier engines while retaining the original-type cam bearings, which are compatible with the earlier engines.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Oct 24, 2005 1:56 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
During one of the cam/top end oiling discussions, I went to the Carquest warehouse and looked at a set of the late cam bearings. I was curious, to see if these could be used in the early engine to increase oil flow to the top end. The bearings I looked at did not have a groove in the rear bearing. Maybe it was boxed wrong, I will check again, next time I'm there.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Mon Oct 24, 2005 7:04 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14984
Location: Park Forest, Illinoisy
Car Model: 78 Volare
Quote:
The bearings I looked at did not have a groove in the rear bearing. Maybe it was boxed wrong, I will check again, next time I'm there.
I tried to get the grooved bearing when I did my motor. Car Quest had 2 different sets of bearings lised, and neither set had a groove. :shock:

IIRC, my Ultrdyne hydraulic cam does have a groove in the rear journal. :shock:

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Tue Oct 25, 2005 3:49 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
Had to go to the part warehouse, today. They had a stock replacement cam for a 82 D150, in stock. Took a look at it. It does have a full groove around the rear cam journal. The part number for the cam bearings, is different between the hyraulic cam and the solid cams. I also checked the cam bearing numbers and specs. The rear cam bearing is the same in both applications. The # 1,2,3 bearing are shorter for the hydro engine. At this time I don't know the reason for the difference in the length. Wether it is a cam issue, or a block issue.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Tue Oct 25, 2005 4:25 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
Im with Dan on this one what is your reason to convert to hydrulic lift cam and lifters. I would like to hear a good reason. Thanks Ron Parker :D











Bagel Went Boom I Go Zoom


Top
   
 Post subject: A GOOD reason???
PostPosted: Tue Oct 25, 2005 9:54 pm 
Offline
EFI Slant 6
User avatar

Joined: Sun Feb 06, 2005 8:13 pm
Posts: 439
Location: South Austin, Texas
Car Model:
Well, if ya just wanna drive it and not worry about having to adjust the valvesMIGHT be a good reason. My personal experience adjusting slant valves is that it isn't all that difficult, and I'm something of a tinkerer anyway.

What I don't know is how long a proper valve adjustment is good for, and is there any difference in performance between hydraulic and solid valvetrains.

There will always be differing opinions, but ya know what they say about opinions: They're like rectal orfices - they're all different and they all stink, except mine! :roll:

_________________
'64 Dart GT convertible, 64 Dart 170 2-door post sedan in faded blue and rust (the Az Dart) & a sixty THREE Dart 170 2-door post sedan in faded blue and rust. (future project)
Early Dart Disorder (EDD) is real, and I've got it!


Top
   
 Post subject:
PostPosted: Wed Oct 26, 2005 11:08 am 
Offline
Board Sponsor
User avatar

Joined: Wed Oct 23, 2002 7:54 pm
Posts: 658
Location: Hutchinson, MN
Car Model:
Quote:
Dennis, I don't know for sure, never worked on a hydro motor, but I think the groove in on the rear cam journal, not in the bearing. Can anyone confirm this, for sure?
I have a Mopar Performance hydraulic cam and lifter kit. The rear journal of the camshaft has a groove.

Also refer to this service bulletin....

http://www.slantsix.org/forum/viewtopic ... ters#77015

Notice no mention of a different camshaft rear bearing. This is in 1978 model year however.


Top
   
 Post subject:
PostPosted: Wed Oct 26, 2005 4:40 pm 
Offline
Turbo Slant 6

Joined: Sat Feb 19, 2005 5:31 am
Posts: 969
Location: Norway
Car Model:
I can just give you the reason I am going to a hydro cam:
Just because :P

And it is in the wife´s car, and I don´t want to touch it, if I don´t have to :wink:


Top
   
 Post subject:
PostPosted: Sat Nov 12, 2005 7:57 am 
Offline
1 BBL (New)

Joined: Tue Sep 27, 2005 3:45 pm
Posts: 3
Location: Dayton, Ohio
Car Model:
Well, I guess it`s time to relate my recent experience with Clifford on just this matter.
Stay with solids, unless you enjoy headaches!!

Cliffords expertice must have died along with Jack Clifford. Those guys don`t know jack $#!+!! They will be happy to sell ya any of thier products, tho!

To thier credit, they did exchange the hyd cam & lifters for a solid one,with my only expense being shipping back to them. That DID cost me double, the address on thier website has not been updated, and they moved 12 weeks earlier, at that time! So the hyd cam made a round trip, and then back again :roll:

If ya gotta have hyd, buy an orig hyd engine to start with, much easier on the brain!

BTW, Summit carries brand new Offy alum valve cover at a decent price, and man, what a look!!

Bob


Top
   
 Post subject:
PostPosted: Sat Nov 12, 2005 8:38 am 
Offline
Turbo Slant 6
User avatar

Joined: Thu Jun 09, 2005 8:33 pm
Posts: 745
Location: Rolla, MO
Car Model:
So which cam did you ultimately end up with, and are you satisfied with it's performance?

Chris


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 14 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited