| Slant Six Forum https://slantsix.org/forum/ |
|
| Motor Mount Replacement https://slantsix.org/forum/viewtopic.php?t=14973 |
Page 1 of 1 |
| Author: | vynn3 [ Wed Nov 09, 2005 10:40 am ] |
| Post subject: | Motor Mount Replacement |
Lost a motor mount on the way home from work last night (and I mean LOST — the alternator is resting against the passenger inner fender!). Replacement seems pretty straighforward, but the only time I've done it was on a V8 when the engine was out of the car. Any tips or tricks that would ease/quicken the process? I don't have a cherry-picker — can I do this job with a floor jack? As usual, thanks a bunch for your insight! VM |
|
| Author: | mcnoople [ Wed Nov 09, 2005 10:58 am ] |
| Post subject: | |
On a slant if it is the drivers mount simple with a floor jack and a block of wood. Pass side can be a little tight fitting but doable. It really comes down to what kinda car it is in. |
|
| Author: | vynn3 [ Thu Nov 10, 2005 5:35 am ] |
| Post subject: | |
Sorry, I should know better by now. '72 Swinger, automatic. I'll be replacing both while I'm at it, but it's definitely the passenger side that failed. VM |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|