Personally, I like the MSD stuff. I run a 6-AL, Blaster coil, and a stock electronic distributor.
| Slant Six Forum https://slantsix.org/forum/ |
|
| MSD for a slant https://slantsix.org/forum/viewtopic.php?t=14983 |
Page 1 of 1 |
| Author: | benevolance [ Thu Nov 10, 2005 12:53 am ] |
| Post subject: | MSD for a slant |
If not the MSD... What Distributor/Ignition conbo do you recommend for the slant for a bolt on performance upgrade? -Peter |
|
| Author: | slantzilla [ Thu Nov 10, 2005 3:56 am ] |
| Post subject: | |
Personally, I like the MSD stuff. I run a 6-AL, Blaster coil, and a stock electronic distributor.
|
|
| Author: | SlantSixDan [ Thu Nov 10, 2005 8:38 am ] |
| Post subject: | |
Standard Chrysler electronic distributor (recurved to suit my car and driving), GM HEI module, MSD Blaster coil. |
|
| Author: | dusty7t4 [ Thu Nov 10, 2005 12:07 pm ] |
| Post subject: | |
just don't buy a jacobs......boy was that a waste -dave |
|
| Author: | SlantSixDan [ Thu Nov 10, 2005 12:14 pm ] |
| Post subject: | |
Quote: just don't buy a jacobs
Yeah, what he said. Don't buy a Jacobs.
|
|
| Author: | Will [ Thu Nov 10, 2005 4:47 pm ] |
| Post subject: | |
I run a Mallory Unilite dist. all the rest of the stuff is msd. Will |
|
| Author: | Rob64GT [ Sat Dec 17, 2005 8:47 am ] |
| Post subject: | |
I have been real happy with a Chrysler electronic distributor, used HEI module and a MSD High Vibration Blaster coil. So far no real need to get a msd box. Paid $2 for a used HEI module at pick and pull Complete bargan! and no ballast resistor too. I set my plugs at .045 and I get better starting and I am getting much better MPG, but then my points were out of adjustment... |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|