Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 10:06 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: 1920 Interchangability
PostPosted: Wed Nov 09, 2005 6:27 pm 
Offline
TBI Slant 6
User avatar

Joined: Wed Jun 29, 2005 7:34 am
Posts: 222
Location: Boulder Colorado
Car Model:
I have a 1975 225 with auto. trans. and a Holley 1945 and I want a new carb.

Carter BBS seem hard to come by but 2 Holley 1920's have come up on ebay both well priced.

One is model 1920 R4656A which is for a 1971 225 with auto trans.

The second is model 1920 R6594A for a 1973 with auto trans.

Both have the same bore as my carb. However the venturi's are different. Will either of these work for my vehicle? I will also need an electric choke, correct?

_________________
God took you away, then brought you back to me.
Image


Top
   
 Post subject:
PostPosted: Wed Nov 09, 2005 6:53 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
The '73 carb will have more of your '75 hookups.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Wed Nov 09, 2005 8:06 pm 
Offline
TBI Slant 6
User avatar

Joined: Wed Jun 29, 2005 7:34 am
Posts: 222
Location: Boulder Colorado
Car Model:
will it offer improved driveability for my vehicle when compared with the 1945?

and will it require an electric choke? there is a 75-76 electric choke on sale also on ebay for $15.

_________________
God took you away, then brought you back to me.
Image


Top
   
 Post subject:
PostPosted: Wed Nov 09, 2005 8:20 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Quote:
will it offer improved driveability for my vehicle when compared with the 1945?

and will it require an electric choke? there is a 75-76 electric choke on sale also on ebay for $15.
The 1920 is a better design than the 1945, but there are ways in which 1920s deteriorate irreversibly after a few decades, and a carb in good shape is better than a carb in bad shape. I can't see this eBay carb you're talking about, so I can't comment. Your '75 already has an electrically-heated choke, which isn't the same as an electric choke. Don't know much about the '75-'76 unit you see on eBay; can't see that, either!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Wed Nov 09, 2005 8:58 pm 
Offline
TBI Slant 6
User avatar

Joined: Wed Jun 29, 2005 7:34 am
Posts: 222
Location: Boulder Colorado
Car Model:
here is a picture of the electric choke:
Image
part no 9085

1920 would be sent to carb doctor

_________________
God took you away, then brought you back to me.
Image


Top
   
 Post subject:
PostPosted: Wed Nov 09, 2005 9:06 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
That choke won't work with a 1920. Arm's the wrong length and angled the wrong way at the end.

Gee, if you're going to send a carb to the OCD, you should take the time to find the carb you really want, which is a Carter BBS for a 1974 Dodge D100 pickup. Perhaps the OCD can help you find the carb. Or, maybe now's a good time to do a 2bbl swap?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Wed Nov 09, 2005 9:32 pm 
Offline
TBI Slant 6
User avatar

Joined: Wed Jun 29, 2005 7:34 am
Posts: 222
Location: Boulder Colorado
Car Model:
would a 2 bbl require a different intake manifold? different throttle linkage? new choke assy? or is it link and go?

_________________
God took you away, then brought you back to me.
Image


Top
   
 Post subject:
PostPosted: Thu Nov 10, 2005 7:20 am 
Offline
Turbo EFI
User avatar

Joined: Sat Jun 19, 2004 8:01 pm
Posts: 1937
Location: Rhine, GA
Car Model:
2-barrel would require different intake manifold, throttle linkage, kickdown linkage, and choke thermostat.

_________________
82 D150-225/727
02 Dakota-3.9/5 speed
87 GMC C7000-8.2 Detroit Diesel/5+2


Top
   
 Post subject:
PostPosted: Thu Nov 10, 2005 8:43 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Quote:
would a 2 bbl require a different intake manifold? different throttle linkage? new choke assy? or is it link and go?
You'd need a 2bbl intake manifold, air cleaner, trans kickdown and throttle linkage assembly, shorter throttle cable and 2bbl choke (factory or new electric). And of course a well-built appropriate 2bbl carb.

The upgrade is very much worthwhile on a car like yours. Driveability and performance improve considerably, and depending on your driving style, fuel mileage isn't affected significantly.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Google [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited