If you have a lot of headwork, you will want a lot of cam, intake, and carb to take advantage of it. The MP 244 and the Comp 252 are basically stock cams.
| Slant Six Forum https://slantsix.org/forum/ |
|
| camshaft https://slantsix.org/forum/viewtopic.php?t=15385 |
Page 1 of 2 |
| Author: | Dustenn89 [ Tue Dec 13, 2005 7:05 pm ] |
| Post subject: | camshaft |
short and simple im tired of looking through the seearch and finding nothing and im being lazy building a slant pretty much a stocker bored 30 over and lots of head work. what is the best cam for me i would like to run a super six if possible, but can run a offy thank you very much, dustin |
|
| Author: | SlantSixDan [ Tue Dec 13, 2005 7:08 pm ] |
| Post subject: | |
The answer is a matter of opinion. I like the MP244 cam. |
|
| Author: | Dustenn89 [ Tue Dec 13, 2005 7:09 pm ] |
| Post subject: | |
next question is where do i get it that was fast by the way |
|
| Author: | sandy in BC [ Tue Dec 13, 2005 7:09 pm ] |
| Post subject: | |
Im just too tired and lazy to answer....... |
|
| Author: | Dustenn89 [ Tue Dec 13, 2005 7:11 pm ] |
| Post subject: | |
then why respond with anything?? |
|
| Author: | emsvitil [ Tue Dec 13, 2005 7:15 pm ] |
| Post subject: | |
Quote: next question is where do i get it
that was fast by the way that's the problem, they're not made anymore.......... |
|
| Author: | NewLancerMan [ Tue Dec 13, 2005 7:15 pm ] |
| Post subject: | |
unfortunately, the mp244 cam isn't available anymore. Dan has one though he might sell to you. Otherwise, you can look at some of the compcams (252 has mixed reviews, depends on who you ask) or something similar. |
|
| Author: | Dustenn89 [ Tue Dec 13, 2005 7:31 pm ] |
| Post subject: | |
what about the 264? dan u still have the 244? |
|
| Author: | mopar_nocar [ Tue Dec 13, 2005 7:52 pm ] |
| Post subject: | erson cams |
erson has several cam profiles available for the slant. check on summit's web page. sb |
|
| Author: | slantzilla [ Tue Dec 13, 2005 7:53 pm ] |
| Post subject: | |
If you have a lot of headwork, you will want a lot of cam, intake, and carb to take advantage of it. The MP 244 and the Comp 252 are basically stock cams.
|
|
| Author: | Dustenn89 [ Tue Dec 13, 2005 8:00 pm ] |
| Post subject: | |
i only see 1 grind at summit and it looks maybe a lil extreme correct me if i am wrong |
|
| Author: | CStryker [ Wed Dec 14, 2005 1:49 am ] |
| Post subject: | |
yeah, summit makes them hard to find... check their online catalog (http://go.mrgasket.com/pdf/ChryPlyDodge.pdf and then search by part number on summit. |
|
| Author: | SlantSixDan [ Wed Dec 14, 2005 2:18 am ] |
| Post subject: | |
Quote: Quote: next question is where do i get it
that was fast by the way that's the problem, they're not made anymore |
|
| Author: | emsvitil [ Wed Dec 14, 2005 4:04 am ] |
| Post subject: | |
Quote: Quote: Quote: next question is where do i get it
that was fast by the way that's the problem, they're not made anymore I was waiting for you to pop in with "where do they live" and "where do I get it" and "how much poorer will I be" |
|
| Author: | bwhitejr [ Wed Dec 14, 2005 4:21 am ] |
| Post subject: | Camshaft |
I found one here: http://moparsupercenter.com/Products/pa ... 28396.html bwhitejr |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|