| Slant Six Forum https://slantsix.org/forum/ |
|
| What Kind of Carb would you use? https://slantsix.org/forum/viewtopic.php?t=15736 |
Page 1 of 1 |
| Author: | Delbert [ Thu Jan 12, 2006 8:47 pm ] |
| Post subject: | What Kind of Carb would you use? |
I am currently trying to get my first slant six running. Its in a 64 Valiant wagon. Please forgive me, I don't know much about MOPAR. I have a 2bbl super 6 intake manifold and I need to buy a carb to fit it. What size and brand would you recommend? I plan to beef up the Exhaust, ignition, and intake. Please advise. THanks [/img] |
|
| Author: | Reed [ Thu Jan 12, 2006 9:45 pm ] |
| Post subject: | |
Here is some useful reading for you. Read it. All of it. Twice. http://www.slantsix.org/articles/supersix/article.htm Welcome to the forum and good luck weith your project! |
|
| Author: | slantvaliant [ Thu Jan 12, 2006 9:50 pm ] |
| Post subject: | |
A lot of folks use Carter BBD. It's probably one of the easier carbs to use for this application. Because it was used by the factory in the Super Six, cables, kickdowns, and such fit. That is what I have on the shelf and plan to put on my '64, when I get around to it. Others use assorted Holleys, including the Holley/Weber 5200 series progressive 2-barrels, and who knows what else. |
|
| Author: | SlantSixDan [ Thu Jan 12, 2006 10:02 pm ] |
| Post subject: | |
Yep, a carefully-picked Carter BBD in good condition would be my pick to start out with. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|