Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Dec 02, 2024 2:28 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Wed Jan 18, 2006 11:48 am 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13063
Location: Fircrest, WA
Car Model: 76 D100
I got my new e-Bay dial back timing light in the mail yesterday (yay), but it didn't come with instructions. It has the dial on the back for advance degrees, but how do I use this on the car? I know how to hook it up, but how do I use the dial back fuction?

THanks!


Top
   
 Post subject:
PostPosted: Wed Jan 18, 2006 11:51 am 
Offline
Board Sponsor
User avatar

Joined: Sat Feb 08, 2003 2:37 pm
Posts: 4194
Location: CA
Car Model:
If the dial is set to 0, then its read just like any normal timing light. When mark is seen at 0deg mark on timing mark tab, engine is at 0 degrees advance.

When the dial is set to, say 5deg, and the mark is at 0deg on the timing mark tab, engine is at 5 deg advance. 10 deg on the dial, mark at 0 on engine, 10 degrees advanced, etc


Top
   
 Post subject:
PostPosted: Thu Jan 19, 2006 12:25 am 
Offline
Turbo EFI
User avatar

Joined: Sun Nov 03, 2002 1:49 pm
Posts: 2445
Location: Lubbock, TX
Car Model:
Yep. If you want to set the initial timing set to 10BTDC, turn the dial to 10. Rotate the distributer until the timing mark lines up to 0. Tighten up distributer and there you go. To check total timing, turn dial to where you want it (32 degrees for example) and rev up engine to where ever it stops advancing. Adjust timing as needed to get desired total. Again, when you get it right, the timing mark on the balencer will line up with 0 on the tab on the timing chain cover. Have fun!


Top
   
 Post subject:
PostPosted: Thu Jan 19, 2006 8:28 am 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13063
Location: Fircrest, WA
Car Model: 76 D100
Okay, sounds simple enough. I just can't make the connection of how the timing guns knows when the engine is at the specified degree of advance. It seems like the gun would need an internal tachometer and would need to know the number of cylinders. As long as it works I don't care, I just don't get how it works.

Anyway, thanks for the instructions! :D


Top
   
 Post subject:
PostPosted: Thu Jan 19, 2006 10:17 am 
Offline
Supercharged
User avatar

Joined: Mon Sep 26, 2005 5:09 pm
Posts: 2946
Location: Gilbert, Arizona
Car Model: 1962 Plymouth Valiant Signet
Every time the light is triggered the engine has rotated 360 degrees. A fairly simple timing circuit would be all that is needed to complete the puzzle.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.


Top
   
 Post subject:
PostPosted: Thu Jan 19, 2006 1:37 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
Quote:
Every time the light is triggered the engine has rotated 360 degrees. A fairly simple timing circuit would be all that is needed to complete the puzzle.

Where did you get the 2-stroke engine????????? :roll:


It's actually 720 degrees. :lol:

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)


Top
   
 Post subject:
PostPosted: Thu Jan 19, 2006 1:41 pm 
Offline
Supercharged
User avatar

Joined: Mon Sep 26, 2005 5:09 pm
Posts: 2946
Location: Gilbert, Arizona
Car Model: 1962 Plymouth Valiant Signet
Quote:
Where did you get the 2-stroke engine????????? :roll:


It's actually 720 degrees. :lol:
What. doesn't everyone run a Saab engine?
You're correct... but it's still the same principle.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited