Thanks Pierre!
That's a great tool for guys playing with gear upgrades, axle swaps, and 'what if'... good way to check calculated rpm when recurving distributors or wondering why your mileage is off.
-D.Idiot
| Slant Six Forum https://slantsix.org/forum/ |
|
| While on the topic...calculators? https://slantsix.org/forum/viewtopic.php?t=15829 |
Page 1 of 1 |
| Author: | DusterIdiot [ Thu Jan 19, 2006 3:03 pm ] |
| Post subject: | While on the topic...calculators? |
Kind of related to the subject of 'how low in RPM'... Does anyone have a good tire/axle ratio/rpm-mph/ tranny calculator?... I used to have a real good one that came on an excel spreadsheet that you entered in your tranny gear ratios, your rear ratio, and your tire profile- then it would kick out the tire diameter/width/circumference, the speedo gear teeth count needed(late mopar), and two charts showing rpm at mph in 10mph sections then mph at rpm from 1500-8000... Unfortunately I'm not sure where I downloaded it and the poor spreadsheet has now corrupted and I don't hve a back up... Anyone have a nice useful tool like this or a link? Thanks, -D.Idiot |
|
| Author: | Pierre [ Thu Jan 19, 2006 3:35 pm ] |
| Post subject: | |
http://www.moparts.com/Tech/tech/pages/speedo.html has a seperate excel sheet for auto and manual trannies. |
|
| Author: | DusterIdiot [ Thu Jan 19, 2006 4:16 pm ] |
| Post subject: | Perfect! |
Thanks Pierre! That's a great tool for guys playing with gear upgrades, axle swaps, and 'what if'... good way to check calculated rpm when recurving distributors or wondering why your mileage is off. -D.Idiot |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|