Cox Bros have the best gasket for Slant Six cars . I have run the same gasket for two years with several intake pulls and no problems.
Cox Bros 614-268-9920.
Thanks Ron ParkerUsing A Tennesee Moonshiner To Burn A Bagel
| Slant Six Forum https://slantsix.org/forum/ |
|
| Where to get the best manifold gasket? https://slantsix.org/forum/viewtopic.php?t=16239 |
Page 1 of 1 |
| Author: | Matadem [ Sat Feb 18, 2006 2:53 pm ] |
| Post subject: | Where to get the best manifold gasket? |
my header are leaking at the head I've just used a new gasket maybe it's too thin :S are there sheets so I can make my own gasket for the manifold? |
|
| Author: | HyperValiant [ Sat Feb 18, 2006 3:09 pm ] |
| Post subject: | |
I like the Mr.Gasket 320/320g but it is ussually a special order item from the local parts stores,and I usually keep a couple on hand. They are a little thicker and I have never had leakage problem with headers or stock manifolds using them. HyperValiant |
|
| Author: | Ron Parker [ Sat Feb 18, 2006 7:17 pm ] |
| Post subject: | |
Cox Bros have the best gasket for Slant Six cars . I have run the same gasket for two years with several intake pulls and no problems. Cox Bros 614-268-9920. Thanks Ron ParkerUsing A Tennesee Moonshiner To Burn A Bagel |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|