| Slant Six Forum https://slantsix.org/forum/ |
|
| Torsion bar boot replacements? https://slantsix.org/forum/viewtopic.php?t=16403 |
Page 1 of 1 |
| Author: | NewLancerMan [ Thu Mar 02, 2006 11:59 am ] |
| Post subject: | Torsion bar boot replacements? |
Hey guys, does anyone know where I can get some replacement boots? I've seen some smaller ones that look like they won't fit into the control arm correctly, but nothing like the crusty cracked ones I pulled off. Any help/pn is appreciated! I found a place can Suspension Parts Restoration in Modesto, CA but wasn't sure if these are available from local places like NAPA. When I called, they couldn't find a matching PN. MJ |
|
| Author: | Pierre [ Thu Mar 02, 2006 12:20 pm ] |
| Post subject: | |
Mopar performance makes them and so does energy suspesion. They do appear small and are a PAIN to get on. |
|
| Author: | R/T Magnum [ Thu Mar 16, 2006 11:16 am ] |
| Post subject: | |
Jacks sells a few hard to find parts. http://www.jacksautoparts.com/catalog/suspension.html |
|
| Author: | NewLancerMan [ Fri Mar 17, 2006 11:33 am ] |
| Post subject: | |
Thanks Magnum, that's exactly what I was looking for! MJ |
|
| Author: | JamesM007 [ Mon Mar 20, 2006 7:13 am ] |
| Post subject: | |
Use a hair dryer. It took me about 3-4 minutes of heating the boot and it slipped on much easier than when I was trying to make it fit cold. |
|
| Author: | JamesM007 [ Mon Mar 20, 2006 7:13 am ] |
| Post subject: | |
double post. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|