| Slant Six Forum https://slantsix.org/forum/ |
|
| Where to get 10" drums? https://slantsix.org/forum/viewtopic.php?t=16509 |
Page 1 of 1 |
| Author: | Rob64GT [ Sat Mar 11, 2006 6:52 am ] |
| Post subject: | Where to get 10" drums? |
Where can I get 10"x1 3/4" rear drums for my 66 Valiant? I went to the auto parts store and they didn't even have a listing for the drums and I'm not sure if this is the correct drum from Rock Auto WAGNER Part # BD60123 |
|
| Author: | VDART [ Sat Mar 11, 2006 7:29 am ] |
| Post subject: | |
parts america lists them on line & so does rock auto |
|
| Author: | Dennis Weaver [ Sat Mar 11, 2006 7:40 am ] |
| Post subject: | |
I also found them serching those sites. They didn't seem to be listed for a '66 Valiant, but I put in a '70 Duster 340 and got back that part # and availability. Drum should fit the '66 w/ rear 10" drumz... D/W |
|
| Author: | Charrlie_S [ Sat Mar 11, 2006 10:31 am ] |
| Post subject: | |
Be carefull. I have found listings for the 10x1 3/4 rear drum, but they were 4 1/2 inch bolt pattern. |
|
| Author: | SlantSixDan [ Sat Mar 11, 2006 11:30 am ] |
| Post subject: | |
I'm showing 60123 as the correct rear 10" drum for small-bolt (4") applications including your '66. The large-bolt (4½") 10" rear drums have different P/Ns. |
|
| Author: | Pierre [ Sat Mar 11, 2006 2:17 pm ] |
| Post subject: | |
Autospecialty (TRW brand) AD8344 10" x 1 3/4" That is the correct part # for a sbp 10" drum I had trouble finding them for my a body 8 3/4" when doing that swap - parts stores would show them but couldn't get htem. I ended up getting them from www.megapartsusa.com Their website doesn't show brake parts any more but it wouldn't hurt getting in touch with them to see if they have any left. Next time I have to replace them I may look at getting a dfiferent setup all together, maybe the more common 10x2.5" setup |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|