| Slant Six Forum https://slantsix.org/forum/ |
|
| Master cylinder gromet https://slantsix.org/forum/viewtopic.php?t=16581 |
Page 1 of 1 |
| Author: | busboy [ Thu Mar 16, 2006 6:17 am ] |
| Post subject: | Master cylinder gromet |
Anyone have a source or part number for that pushrod gromet I'm supposed to replace when I change master cylinders? It goes on the end of the arm that comes out of the firewall into the MC. I'm putting the KH conversion on and changing to a disc MC. It's a 72' Swinger with 9" drums right now. |
|
| Author: | 64 Convert [ Thu Mar 16, 2006 7:17 am ] |
| Post subject: | |
Sometimes they come with the master cylinder, but the last time I got one without, I used a small section of fuel hose. It's working fine after 3 years. |
|
| Author: | james longhurst [ Thu Mar 16, 2006 7:33 am ] |
| Post subject: | |
i recently bought a raybestos pg plus(new?) master cylinder for my a-100 van and the bushing came with the cylinder. i have bought cheap s#!t reman cylinders and they are almost never included. i've never used one of these raybestos master cyls, so i have no idea if they are any good. -james |
|
| Author: | Dart270 [ Thu Mar 16, 2006 4:12 pm ] |
| Post subject: | |
Magnumhp.com has the right ones for about $3+ship each. I little spendy for what it is, but I bought a few to have around. Lou |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|