Slant Six Forum :: Turbo Exhaust Manifold

Okay, I talked to Mike. He is still interested in doing some manifolds. He is working on mine, and has come up with a spare for a mopar 2.2 turbo, for anybody that is interested.

So, if you are actually interested, let me know. I posted the info on how to send in the manifolds before, plus costs, etc, and he got zero response, besides me. I feel yanked around, and I am guessing that Mike does as well. So, no play'n, who is actually in?

Thanks,

Greg

Author:	Bohmer2 [ Thu Mar 23, 2006 6:09 am ]
Post subject:	Turbo Exhaust Manifold
A while back there was a thread regarding possibily getting a group buy in on having someone machine/modify stock exhaust manifolds for turbos did this thread die because of lack of interest? Brian

Author:	mcnoople [ Thu Mar 23, 2006 7:00 am ]
Post subject:
That's a good question. My problem with that group buy was that it was designed around a mani for the 225 which may or may not have fit onto a 170 with clearance to the pan and starter.

Author:	SlantSixDan [ Thu Mar 23, 2006 7:06 am ]
Post subject:
Quote: My problem with that group buy was that it was designed around a mani for the 225 which may or may not have fit onto a 170 with clearance to the pan and starter. Seems to me this could be addressed in the design of the manifold. See the factory prototype in Hemmings Classic Car magazine, April '06.

Author:	Dart270 [ Thu Mar 23, 2006 1:38 pm ]
Post subject:
gmader was the instigator of the thread. Not sure what happened, and I'm still interested too. Lou

Author:	mcnoople [ Thu Mar 23, 2006 3:15 pm ]
Post subject:
Quote: gmader was the instigator of the thread. Not sure what happened, and I'm still interested too. Lou As am I if it will fit a 170

Slant Six Forum https://slantsix.org/forum/

Turbo Exhaust Manifold https://slantsix.org/forum/viewtopic.php?t=16698	Page 1 of 1

Author:	CStryker [ Thu Mar 23, 2006 3:23 pm ]
Post subject:
I might be interested to, depending on cost.

Author:	gmader [ Thu Mar 23, 2006 7:35 pm ]
Post subject:
I need to talk to Mike, and see where mine is. Sorry, I have been out of town, so I haven't checked the board in awhile. I will check with him when I get home. Greg

Author:	grthigpen [ Fri Mar 24, 2006 4:27 am ]
Post subject:
i have been workiong on how to turbo my car...i would like to have a manifold that is designed for a turbo GRT

Author:	gmader [ Tue Apr 11, 2006 8:08 am ]
Post subject:
Okay, I talked to Mike. He is still interested in doing some manifolds. He is working on mine, and has come up with a spare for a mopar 2.2 turbo, for anybody that is interested. So, if you are actually interested, let me know. I posted the info on how to send in the manifolds before, plus costs, etc, and he got zero response, besides me. I feel yanked around, and I am guessing that Mike does as well. So, no play'n, who is actually in? Thanks, Greg

Author:	REDNECKMOBILE [ Mon Apr 17, 2006 10:47 am ]
Post subject:
Quote: Okay, I talked to Mike. He is still interested in doing some manifolds. He is working on mine, and has come up with a spare for a mopar 2.2 turbo, for anybody that is interested. So, if you are actually interested, let me know. I posted the info on how to send in the manifolds before, plus costs, etc, and he got zero response, besides me. I feel yanked around, and I am guessing that Mike does as well. So, no play'n, who is actually in? Thanks, Greg Sorry, I'm a little late on this thread but are there any pictures available.

Page 1 of 1	All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/