Simple question.

Are the brake calipers of the F-Body (Volare/Aspen) located on the forward side of the rotor or on the rear?

Thanks

on my car i put them in the rear. it is possible to put them in the front if you swap the spindles side to side. with the calipers in the front you might have clearance problems with the sway bar if you have one. i don't know what effect having the calipers in the front would have on braking performance. maybe others will chime in and let us know.
'
zedpapa

_________________
1970 dodge dart w/225 /6 bored .040" over, holley 390cfm w/vac. sec., compcams 252s, clifford shorty headers w/2.5" exhaust w/flowmaster, f-body 11" front discs, aluminum A-833OD, 8 1/4 w/3.21 SG
soon to have 5 gears!!!

Factory they are to the back.

Thanks,

I was looking for the factory location,

Rick