Slant Six Forum
https://slantsix.org/forum/

New motor/trans are in the car......
https://slantsix.org/forum/viewtopic.php?t=16973		 Page 1 of 1
Author:  slantzilla [ Sun Apr 09, 2006 12:02 pm ]
Post subject:  New motor/trans are in the car......
I will be able to get it fired next Friday. I just have to put the radiator and intake/headers in, and wire in the box/trans brake button. :shock:

With a brake AND a 150 shot I bet I can really tear up some shyt now. :lol: :roll: :twisted:
Author:  sandy in BC [ Sun Apr 09, 2006 5:57 pm ]
Post subject: 
Serious progress noted......
Author:  imnoisydart [ Sun Apr 09, 2006 8:01 pm ]
Post subject: 
Don't twist it up too bad- think about the resale value!
Author:  Ron Parker [ Sun Apr 09, 2006 8:04 pm ]
Post subject: 
I totally destroyed a flexplate today and hope i did not ruin the tourque converter, When i shifted to 2nd gear today at our race it went like in to nutural . I hope we did not tear up a lot of stuff. PS this is a 904 racing transmission that has run for 5 years . It probally has 5000 runs on it we will see. Thanks Ron Parker :(









More New Gear Than We Thought
Author:  Rob Simmons [ Mon Apr 10, 2006 4:42 am ]
Post subject: 
Ouch! Sorry to hear that Ron. I hope you get it up and running again soon. Was it all that extra power from your new Bamboozler that put you over the top? :wink:
Author:  Charrlie_S [ Mon Apr 10, 2006 5:53 am ]
Post subject: 
Hope you didn't over rev the engine, and hurt that. What kind of times are you running this year?
Author:  Ron Parker [ Mon Apr 10, 2006 6:18 am ]
Post subject: 
Charlie i doint think it hurt the engine it shifted to second and as soon as the rpm came down it let go. I was running a 7.80 today. I have got a new plate coming from the Cox Bros. which is a mod 340 plate Thanks Ron Parker
Author:  slantzilla [ Mon Apr 10, 2006 7:53 am ]
Post subject: 
Good luck Possum. :shock:

I talked to Mike last night. I may leave the box out and run mine on a 100 shot in Pro just to get some laps on it. Not sure, but I am gonna try to get to a T&T Saturday to feetsbrake it and get a few runs down on moder. :D
Author:  Ron Parker [ Mon Apr 10, 2006 5:39 pm ]
Post subject: 
Charlie pulled the vavle cover and everything looks good there no bent pushrods broke springs or rocker damage that i can see. It goes to my transmission builder next monday if the flex plate comes i will buzz Jim and see if it went out today. Thanks Ron Parker :D










New Year I know Some New Gear
Author:  Ron Parker [ Mon Apr 10, 2006 5:48 pm ]
Post subject: 
Run Bagel be a pilot not a autopilot be a footbraker and the Slantsix force will be with you. Wana be won Possum. :D











The Force Is With The Footbrakers
Author:  slantzilla [ Tue Apr 11, 2006 6:12 am ]
Post subject: 
Quote:
Run Bagel be a pilot not a autopilot be a footbraker and the Slantsix force will be with you. Wana be won Possum. :D











The Force Is With The Footbrakers
You been hanging out with 'Uncle Jack' again Possum? :D
Author:  featherduster76 [ Tue Apr 11, 2006 12:50 pm ]
Post subject: 
You gonna be footbraking any of us at the farm Ron?? :D :shock:
Author:  Ron Parker [ Tue Apr 11, 2006 6:15 pm ]
Post subject: 
Doint know have to wait and see about the trans and what damage was done. If it means a new trans probally put in the trans brake and delay box two step the full package. If the flexplate is all that let go we might try to footbrake one more year for a national title. Also it is according to what my friend Rodney is going to do. Thanks Ron Parker :D









New Year New Gear
Author:  Ron Parker [ Tue Apr 18, 2006 3:01 pm ]
Post subject: 
Yep :D Possum













New Year New Gear
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/