didn't know about it but already droolin
where did you find it? they have an internet site? links please
| Slant Six Forum https://slantsix.org/forum/ |
|
| Rollmaster Timing Chain? https://slantsix.org/forum/viewtopic.php?t=17160 |
Page 1 of 1 |
| Author: | Hyper'72Valiant [ Thu Apr 20, 2006 10:58 pm ] |
| Post subject: | Rollmaster Timing Chain? |
What do you guys think of a Rollmaster Timing Chain? Are they as good as they say they are? Here are the details: Billet crank and cam sprockets. Chain is German IWIS chain, the finest in the world. K1045 Billet steel bar on sprockets. CS5300 3-piece 9-key all BILLET steel timing set - hardened billet steel Double .250" HD pin true roller Thanks, Cory |
|
| Author: | argentina-slantsixer [ Fri Apr 21, 2006 6:08 am ] |
| Post subject: | |
didn't know about it but already droolin where did you find it? they have an internet site? links please |
|
| Author: | james longhurst [ Fri Apr 21, 2006 7:21 am ] |
| Post subject: | |
i've never run one but yeah, they do look nice. the multi-keyway crank sprocket is a great idea to ease cam degreeing, but more of a pain since the sprocket is an interference fit on the crank. be much better if it just slid on like a smallblock. -james |
|
| Author: | OzHemi [ Fri Apr 21, 2006 9:00 am ] |
| Post subject: | |
I have used them on the hemi-6 and on my Holden V-8 as well...excellent stuff ! |
|
| Author: | Dart270 [ Fri Apr 21, 2006 9:53 am ] |
| Post subject: | |
I got one while in Oz last year and it looks better than anything else. Someone here is thinking of bringing a few of these to the US (Drake). Cox Bros also sell a very similar Oz-made one (JP) for about the same price as a rollmaster. Lou |
|
| Author: | Hyper'72Valiant [ Fri Apr 21, 2006 9:52 pm ] |
| Post subject: | |
So, they are definately worth the money? Here is a clickable pic of the beasty:  Cory |
|
| Author: | Will [ Sat Apr 22, 2006 6:49 am ] |
| Post subject: | |
I have been running one for years from the Cox Bros. with no problem. |
|
| Author: | 62savoywagon [ Sun Apr 23, 2006 3:19 pm ] |
| Post subject: | |
They show up on Egag...a vendor in Florida carries them. Mad Dog racing parts or something like that. |
|
| Author: | james longhurst [ Sun Apr 23, 2006 4:07 pm ] |
| Post subject: | |
mad dog are good to deal with, prices are reasonable too. i think i got my romac balancer (318) from them. -james |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|