| Slant Six Forum https://slantsix.org/forum/ |
|
| Carter BBS tall jets https://slantsix.org/forum/viewtopic.php?t=17564 |
Page 1 of 1 |
| Author: | emsvitil [ Sun May 14, 2006 10:05 pm ] |
| Post subject: | Carter BBS tall jets |
Here's some info I managed to put together about the carter tall jets. Flow is without the metering rod. Part#..................CC..........mean.........holley equivalent 120-265S.......320-326cc......323...........63 120-264S.......337-343cc......340...........64 120-268S.......360-366cc......363...........65.5 120-267S.......380-386cc......383...........66.5 120-263S.......400-408cc......404...........67.5 120-277S.......417-423cc......420...........68.5 120-293S.......436-444cc......440...........69.5 The holley info I got from here: http://www.barrygrant.com/bgfuel/defaul ... ifications and did a rough extrapolation for the holley equivalent above. My jet is a -263S, and a .067 drill bit fit, a .070 drill bit didn't. A holley 67 jet is .068 and a holley 68 is .069, so area and Flow does seem to be a linear relationship to jet area. |
|
| Author: | SlantSixDan [ Mon May 15, 2006 7:35 am ] |
| Post subject: | |
This is good info, thanks for posting it. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|