| Slant Six Forum https://slantsix.org/forum/ |
|
| Slant six Parts from Chrysler https://slantsix.org/forum/viewtopic.php?t=18065 |
Page 1 of 1 |
| Author: | mbwetzel [ Wed Jun 14, 2006 4:46 pm ] |
| Post subject: | Slant six Parts from Chrysler |
Are slant six parts still available from Mopar? I have been to Mopar.com and looked through the latest Performance catalog from Mopar, and there are no slant six parts listed. How do you get DC cams, Ignition conversions, and other stuff for slant six's? |
|
| Author: | james longhurst [ Wed Jun 14, 2006 5:53 pm ] |
| Post subject: | |
it'll be a hit or miss proposition, and a few years since i've tried it. your best bet is to find an older dealership with some good old boys behind the counter. the older the better  and be REAL nice to them when you ask since a lot of stuff may need to be looked up in a book  the cams are still around from MP, but not quite so many as 10 or so years ago. i'd look elsewhere for these kind of HP parts. -james |
|
| Author: | SlantSixDan [ Wed Jun 14, 2006 6:04 pm ] |
| Post subject: | Re: Slant six Parts from Chrysler |
Quote: Are slant six parts still available from Mopar?
No.Quote: the latest Performance catalog from Mopar, and there are no slant six parts listed.
They were all discontinued years ago  Quote: How do you get DC cams
You don't, except for the 244° (MP P4120243), which can now be ordered from Doctor Dodge's cam grinder.Quote: Ignition conversions
See HereQuote: and other stuff for slant six's?
Ask on here for recommendations on a part-by-part basis.
|
|
| Author: | Slant n' Rant [ Thu Jun 15, 2006 3:27 pm ] |
| Post subject: | |
Some tune up parts distributer cap $35 canadian and up, rotor $13 and up( gave me the wrong one) I had no choice at the time, but never again. ac delco, napa, or carquest for my next parts |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|