Slant Six Forum
https://slantsix.org/forum/

Pushbotton to A833 swap interior trim 64 Dart
https://slantsix.org/forum/viewtopic.php?t=18123
Page 1 of 1

Author:  bbbbbb9 [ Mon Jun 19, 2006 9:19 am ]
Post subject:  Pushbotton to A833 swap interior trim 64 Dart

Those of you that have done this swap. How did you handle the interior trim by the pushbottons?

Author:  SlantSixDan [ Mon Jun 19, 2006 9:27 am ]
Post subject: 

You can just swap in a left dash trim plate from a '63-'64 Dart w/manual trans (3-on-the-three or 4-on-the-floor). Or, you can leave the pushbutton trim plate, with or without the buttons. They won't hurt anything...!

Author:  bbbbbb9 [ Mon Jun 19, 2006 9:33 am ]
Post subject: 

I can't seem to find that trim though. I would like to get rid of the buttons and the lever. Maybe put a clock in there??? Hummmmm Dunno

Author:  SlantSixDan [ Mon Jun 19, 2006 11:30 am ]
Post subject: 

Put a "parts wanted" ad in the relevant forum on here. Send a PM to Doctor Dodge. That trim's out there!

Author:  james longhurst [ Mon Jun 19, 2006 3:40 pm ]
Post subject: 

try andy wittenborn. (914) 941-2744. last time i was at his shop he had half a dozen of these. he only deals with slant six cars and always advertises "no musclecar parts!" he's a fun guy to deal with.

-james

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/