I used a new 20 dollar bill as a tool when I was shopping for SBP wheels.
On a LBP wheel, the corners touch the hole (or stud) centers.
On a SBP, one corner is in center and the other corner touches the far edge of the next hole.
| Slant Six Forum https://slantsix.org/forum/ |
|
| How to know : SBP / LBP https://slantsix.org/forum/viewtopic.php?t=18335 |
Page 1 of 1 |
| Author: | marc426 [ Sat Jul 01, 2006 2:58 pm ] |
| Post subject: | How to know : SBP / LBP |
Did a search on the board but couldn't find a topic talkin about it so here's my question : How can I know if my car has the SBP / LBP? I heard some disc brakes darts had it, is that true? My car is a '67 Dart with power disc brakes (and power steering). Thanks for your help Marc |
|
| Author: | emsvitil [ Sat Jul 01, 2006 3:25 pm ] |
| Post subject: | |
Measure the distance between 2 lug nuts across from each other (not exactly across as there's 5 nuts). When you measure from the center of 1 stud to the outside edge of other stud, you'll either get close to 4" (SBP) or 4.5" (LBP) |
|
| Author: | MJF [ Sat Jul 01, 2006 6:50 pm ] |
| Post subject: | |
SBP has 7/16 bolts and LBP has 1/2 bolts. |
|
| Author: | sixsignet [ Sat Jul 01, 2006 10:18 pm ] |
| Post subject: | |
I used a new 20 dollar bill as a tool when I was shopping for SBP wheels. On a LBP wheel, the corners touch the hole (or stud) centers. On a SBP, one corner is in center and the other corner touches the far edge of the next hole.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|