slant six question

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Engine

All times are UTC-08:00

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Chewie

Post subject: slant six question

PostPosted: Wed Jul 19, 2006 1:18 pm

Offline

4 BBL ''Hyper-Pak''

Joined: Mon Jan 09, 2006 8:17 pm
Posts: 38
Location: Las Vegas NV
Car Model:

Does the starter on a 225 take a shoulder bolt or is there a sleeve used for one of the bolts. Also, where can I get a dipstick and tube for that motor? thanks.

Top

Profile

Reply with quote

mopar_nocar

Post subject: starter

PostPosted: Wed Jul 19, 2006 2:41 pm

Offline

EFI Slant 6

Joined: Wed Nov 02, 2005 12:47 pm
Posts: 445
Location: Runge, TX
Car Model: 1974 W100; 72 Dart

in my experience, there is usually a stud and a bolt holding the starter on...i think the larger size hole is to give you a little wiggle on the stud to install the other bolt. never even noticed how big the holes are until reading your post.

i made my dipstick tube out of 5/16 in brake tubing. seems to work. i am sure there are still replacements available, probably even from a dealer.

sb