| Slant Six Forum https://slantsix.org/forum/ |
|
| slant six question https://slantsix.org/forum/viewtopic.php?t=18663 |
Page 1 of 1 |
| Author: | Chewie [ Wed Jul 19, 2006 1:18 pm ] |
| Post subject: | slant six question |
Does the starter on a 225 take a shoulder bolt or is there a sleeve used for one of the bolts. Also, where can I get a dipstick and tube for that motor? thanks. |
|
| Author: | mopar_nocar [ Wed Jul 19, 2006 2:41 pm ] |
| Post subject: | starter |
in my experience, there is usually a stud and a bolt holding the starter on...i think the larger size hole is to give you a little wiggle on the stud to install the other bolt. never even noticed how big the holes are until reading your post. i made my dipstick tube out of 5/16 in brake tubing. seems to work. i am sure there are still replacements available, probably even from a dealer. sb |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|