| Slant Six Forum https://slantsix.org/forum/ |
|
| Custom Machined Parts Solution https://slantsix.org/forum/viewtopic.php?t=18739 |
Page 1 of 1 |
| Author: | Slanted Opinion [ Sun Jul 23, 2006 3:58 am ] |
| Post subject: | Custom Machined Parts Solution |
Hi folks, Don't know if anyone has used this solution for creating custom parts, but it seems like it might be handy: http://www.emachineshop.com They even have free cad software for designing your stuff. -Mac |
|
| Author: | Reed [ Sun Jul 23, 2006 8:20 am ] |
| Post subject: | |
All right! Here's our chance for an aluminium slant six cylinder head! |
|
| Author: | Matt Cramer [ Sun Jul 23, 2006 11:08 am ] |
| Post subject: | |
There's probably a local version of that in your home town, too - it's called a job shop. The main difference is that EMachineShop has its own CAD system and their marketing targets the general public instead of businesses. They also seem to have a larger collection of machines than your average job shop, although they may just outsource a lot of those operations. If you want to find a local job shop, I'd start by looking in the Thomas Register. It's sort of an industrial Yellow Pages. There's a paper version that your local library will probably have in their reference section, or you can find them online at thomasregister.com and look for the work you need done. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|