| Slant Six Forum https://slantsix.org/forum/ |
|
| Wheel bearing size? https://slantsix.org/forum/viewtopic.php?t=19164 |
Page 1 of 1 |
| Author: | spare_parts13 [ Sun Aug 13, 2006 8:38 am ] |
| Post subject: | Wheel bearing size? |
I'm replacing the front drums on my 71 Dart and wanted to replace the bearings too. I know the drums are 9" but I'm not sure about the bearings. Napa and RockAuto have several different bearing sizes listed for my car and now I'm confused. Any suggestions? Also, do the bearings include the cup and cone? Napa listing claims it does but wanted to make sure. So I'd only need to buy the seal? Next year- disc brakes! |
|
| Author: | tophat [ Sun Aug 13, 2006 5:24 pm ] |
| Post subject: | |
yes the bearings are the cup and the cone, however alot of places including all the napa stores and their warehouse local to me sell them seperate most but not all of the time. try to find the #'s on your old brgs. just the cone # should do it. most places are fair at crossing that # to figure out exactly wich one you need. if you need to turn your drums at all, do it AFTER you have your new cups in and with the drum on the hub. good luck tophat |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|