| Slant Six Forum https://slantsix.org/forum/ |
|
| Pentastar Parts Online Store Open https://slantsix.org/forum/viewtopic.php?t=19840 |
Page 1 of 1 |
| Author: | Slanted Opinion [ Sun Sep 24, 2006 4:35 am ] |
| Post subject: | Pentastar Parts Online Store Open |
Hi, I haven't done business with them yet, but Pentastar Parts (Australia) has opened on online store which includes Slant Six parts. The link to their slant six parts is here http://www.pentastarparts.com.au/sunsho ... /subid/17/ and the link to their home page is here: http://www.pentastarparts.com.au/ Figured we can always use another source for these old sixes! -Mac |
|
| Author: | james longhurst [ Sun Sep 24, 2006 7:23 am ] |
| Post subject: | |
yeah, they have been noted here before. thanks for reminding me of them, though. it appears they have added a few interesting items. i especially like the custom billet cranks. wish they had a pic posted on the site. wonder what the exchange rate is these days.  -james |
|
| Author: | Rust collector [ Sun Sep 24, 2006 7:37 am ] |
| Post subject: | |
1 U.S. dollar = 1.32538105 Australian dollars |
|
| Author: | Jeb [ Sun Sep 24, 2006 3:58 pm ] |
| Post subject: | |
Check out those forged pistons. I need to move to Australia. |
|
| Author: | Charrlie_S [ Sun Sep 24, 2006 4:50 pm ] |
| Post subject: | |
It's always nice to have another source of parts, and this supplier might be great for our friend down under. What I have seen on their site, most is available from stateside suppliers, for less money. |
|
| Author: | Bren67Cuda904 [ Sun Sep 24, 2006 5:09 pm ] |
| Post subject: | |
Those custom pistons sure seem pricey. My shop is going to have a forged set made for $600 Plus rings. Not sure about the cost of the rings but I don't think that they will be $700. |
|
| Author: | Joshie225 [ Sun Sep 24, 2006 5:49 pm ] |
| Post subject: | |
Quote: Check out those forged pistons.
Yeah, and check out the price! Ouch! My custom Venolia pistons were just over $500 after all the options and shipping. The ductile iron top rings were about $115 shipped from Total Seal. The other rings will be from a standard +.060" replacement set. I need to move to Australia. The only parts on that site I'm really interested in are the Romac damper (it's not a dampener as it doesn't moisten the crankshaft) and the Rollmaster timing set. |
|
| Author: | Charrlie_S [ Sun Sep 24, 2006 6:45 pm ] |
| Post subject: | |
Quote: [
Which are both available, here in the states, for less money
The only parts on that site I'm really interested in are the Romac damper (it's not a dampener as it doesn't moisten the crankshaft) and the Rollmaster timing set. |
|
| Author: | dakight [ Sun Sep 24, 2006 7:02 pm ] |
| Post subject: | |
I haven't compared, but don't forget to multiply their parts by about .75 to get the US $ equivalent. $100 AU is about $75 US. But then you have to add shipping which isn't too bad for small items but will be either very expensive or very slow for larger ones. |
|
| Author: | Slanted Opinion [ Mon Sep 25, 2006 5:28 pm ] |
| Post subject: | |
Is the triple SU intake available stateside? I've seen the triple weber sidedraft, but not these. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|