if it wont fit I"ll give you $70 for it
| Slant Six Forum https://slantsix.org/forum/ |
|
| Offy 2X1 Intake https://slantsix.org/forum/viewtopic.php?t=20431 |
Page 1 of 1 |
| Author: | BigBlockBanjo [ Sun Oct 22, 2006 3:13 pm ] |
| Post subject: | Offy 2X1 Intake |
Hey guys, Is there anyone out there running an Offy 2x1 intake AND a/c?? I found a good intake for $50.00, but it doesn't look like it will fit with my a/c compresser. Anybody have this combo? I know I'll be limited on air cleaner options. Thanks! |
|
| Author: | young6 [ Sun Oct 22, 2006 3:24 pm ] |
| Post subject: | |
if it wont fit I"ll give you $70 for it
|
|
| Author: | Slant Cecil [ Sun Oct 22, 2006 3:59 pm ] |
| Post subject: | |
Two of the smaller pre-'67 air cleaners will clear each other. |
|
| Author: | rosspulliam [ Sun Oct 22, 2006 4:19 pm ] |
| Post subject: | |
But will it still clear the a/c compressor in its stock location? |
|
| Author: | SlantSixDan [ Sun Oct 22, 2006 4:30 pm ] |
| Post subject: | |
See this post. |
|
| Author: | rosspulliam [ Sun Oct 22, 2006 4:44 pm ] |
| Post subject: | |
Thats the post I've been looking for and it evaded me! Work is busy tonight so I can't look as hard as I'd wish. |
|
| Author: | BigBlockBanjo [ Sun Oct 22, 2006 9:09 pm ] |
| Post subject: | Offy 2X1 Intake |
Thanks guys! I'll probably just buy the intake. Heck, $50.00 bucks, if it doesn't fit, I know there's someone on here that could use it! I have a '71, and the compressor sets away from the block. It has a 10 in. bracket bolted to the top of the head, about half-way down the length. From what I read, I assume it will work??? I'll let ya'll know. Thanks again! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|