James if i had your talent and skills. I would do my own header make it work and sell it. Just a thought Thanks Ron Parker
It Aint Over Until I Win
| Slant Six Forum https://slantsix.org/forum/ |
|
| How to build a turbo header for any slant six and make it go https://slantsix.org/forum/viewtopic.php?t=21189 |
Page 1 of 2 |
| Author: | james jaggers [ Fri Dec 22, 2006 6:15 am ] |
| Post subject: | How to build a turbo header for any slant six and make it go |
Hey charlie, I am new to the forum. I was wondering does anyone build good turbo headers, or do I have to make my own? I am a fabricator and have all of the equipment but have no time right now. I would love to have it together by april so I can tune on it. |
|
| Author: | Charrlie_S [ Fri Dec 22, 2006 8:12 am ] |
| Post subject: | |
I moved this from "guest posting" thread. James, welcome to the site, but please try to post in the proper area, and in the correct/or new thread. Your question could be easily missed, in the thread, where you had posted. |
|
| Author: | Ron Parker [ Fri Dec 22, 2006 6:44 pm ] |
| Post subject: | |
James if i had your talent and skills. I would do my own header make it work and sell it. Just a thought Thanks Ron Parker It Aint Over Until I Win |
|
| Author: | james jaggers [ Sat Dec 23, 2006 12:06 pm ] |
| Post subject: | |
Is there people out there that need custom headers and innercoolers? If there is, I would love to help some of these guys out. I am building a 1973 duster slant six car right now that it has a 70mm turbo and a huge inner cooler. I might even make my own intake. Should I send some pics?
|
|
| Author: | Rust collector [ Sat Dec 23, 2006 12:42 pm ] |
| Post subject: | |
yes |
|
| Author: | james jaggers [ Sat Dec 23, 2006 1:43 pm ] |
| Post subject: | |
Quote: yes I will send some pics of the hand built headers and the turbonetics wastegate flanges. The headers I am building are for a t-4 type exducer. I will also have some airflow figures off of our superflow 600. We are trying different size valves and lifts to accomadate the turbo.
|
|
| Author: | Ron Parker [ Sat Dec 23, 2006 5:18 pm ] |
| Post subject: | |
Yep I am interested in building a ground up turbo charged engine for my car just caint get the right stuff going. Thanks Ron Parker It Aint Over Until I Win |
|
| Author: | james jaggers [ Mon Jan 08, 2007 12:08 am ] |
| Post subject: | |
Now that the holidays are over I can began to take photos of what I have done so far. I hope I can figure out how to send some pics. |
|
| Author: | james jaggers [ Wed Jan 10, 2007 9:58 pm ] |
| Post subject: | |
I should be able to start sending some pictures as soon as my website is up. If anyone wants to give me some feedback or suggestions please feel free to do so, or have any questions please feel free to ask. |
|
| Author: | Mister Twister [ Fri Jan 12, 2007 3:27 pm ] |
| Post subject: | |
Hello all I am building a 225 turbo block. It is in the shop with the new turbo pistons and rings going to work with local muffler shop drag racing friend of ours to fit the turbo where I want to put the thing good send pics soon!!!http://www.stormcomm.net/donsduster.htm |
|
| Author: | Ron Parker [ Fri Jan 12, 2007 4:59 pm ] |
| Post subject: | |
James as a Slant Six Racer that goes to at least 6 events a year in our Championship series races I hear a lot about turbo headers and regular Slant headers. Not many people doing them for the Slant. I would be interested in a total turbo setup . I would build the engine for this. Thanks Ron Parker It Aint Over Until I Win |
|
| Author: | james jaggers [ Sat Jan 13, 2007 8:31 am ] |
| Post subject: | |
Hey Ron, I am going to talk to a guy monday about cutting some flanges to my demensions. I will have some exhaust flanges and some t-4 turbo flanges made up. I am going to have enough made up to make four or five turbo headers. If you are interested in having some made for you e-mail me, oh by the way, my dad always said you could make a slant six "get it". |
|
| Author: | Ron Parker [ Sat Jan 13, 2007 4:41 pm ] |
| Post subject: | |
James we shot you a email we want to do this year. I want to build a BAD Dart ie Bad Azz Dart. New turbo engine built for a turbo We are going to just need help from the right people. Thanks Ron Parker It Aint Over Until I Win |
|
| Author: | Dart270 [ Sun Jan 14, 2007 7:15 pm ] |
| Post subject: | |
James, Welcome to the site. I am interested in a Slant-t4 header in either stainless or heavy wall steel. Keep us updated on your progress there and let us know your plans. Best, Lou |
|
| Author: | james jaggers [ Wed Jan 17, 2007 5:04 pm ] |
| Post subject: | Exhaust flanges |
I am having exhaust flanges made right now. I am hoping that they are done tommorow. They are one half inch thick. The t4 flanges and the wastegate flanges are the same thickness. |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|