| Slant Six Forum https://slantsix.org/forum/ |
|
| header update /6 https://slantsix.org/forum/viewtopic.php?t=21577 |
Page 1 of 1 |
| Author: | spitfire hdrs [ Tue Jan 23, 2007 3:31 pm ] |
| Post subject: | header update /6 |
here what we have.the jig is done,also 1/2 flanges.i will start building 2nd or 3rd week in feb,,but i would like to have idea about how many bends to get.so if you do want a set or think you might.please e mail me this would help.because once mopar action see this an put under new parts.i could be very booked.this will fit early a's ,trucks,many more.i will tell more as time goes on.225.00 covers all....i hope this helps.h/j 
|
|
| Author: | 66aCUDA [ Tue Jan 23, 2007 5:08 pm ] |
| Post subject: | |
Harold You have a PM Thanks Frank |
|
| Author: | Rick Covalt [ Tue Jan 23, 2007 7:09 pm ] |
| Post subject: | Pictures Please. |
I think I speak for a lot of people who will want a picture before committing to buy. Post a picture as soon as the first set is done and I'm sure you'll get some orders. I'm interested. Thanks, Rick |
|
| Author: | Rob Simmons [ Wed Jan 24, 2007 8:36 am ] |
| Post subject: | Re: Pictures Please. |
Quote: I think I speak for a lot of people who will want a picture before committing to buy. Post a picture as soon as the first set is done and I'm sure you'll get some orders. I'm interested.
Ditto. Thanks, Rick 
|
|
| Author: | spitfire hdrs [ Wed Jan 24, 2007 2:56 pm ] |
| Post subject: | |
ok that will work out for me,i went out put in a order for the bends.when come in i will put a set for a photo..harold |
|
| Author: | slantzilla [ Fri Jan 26, 2007 9:43 am ] |
| Post subject: | |
Harold, any progress on the step headers?
|
|
| Author: | spitfire hdrs [ Fri Jan 26, 2007 1:31 pm ] |
| Post subject: | |
yes the header is jiged an waiting for tubes to make a set.if all goes good end of feb i will make 2 or 3 so they can be seen,an take note what i changed.harold 
|
|
| Author: | slantzilla [ Fri Jan 26, 2007 2:15 pm ] |
| Post subject: | |
Cool!
|
|
| Author: | Dart270 [ Fri Jan 26, 2007 2:39 pm ] |
| Post subject: | |
Great! Give me a shout when they're ready to try out. Lou |
|
| Author: | northeast scamp [ Sun Jan 28, 2007 8:55 am ] |
| Post subject: | |
Funny, I was just talking about maybe getting a header now that I live in a warm climate and an not as reliant on 'carb heat' from the oem manifold anymore. Looking forward to the pics. Todd |
|
| Author: | slantzilla [ Thu Mar 01, 2007 8:36 pm ] |
| Post subject: | |
Harold, any updates on the headers? I now have access to a chassis dyno and may be able to do some back to back testing with my old Cliffords too. I also have a new shipping address when the time comes. 
|
|
| Author: | cjh [ Fri Mar 02, 2007 5:19 am ] |
| Post subject: | |
There is a mob over here called "Pacemaker". They make extractors for the S/6, and are compatable to multiple carbys. Part Number is PH2500. |
|
| Author: | Charrlie_S [ Fri Mar 02, 2007 6:40 am ] |
| Post subject: | |
Quote: There is a mob over here called "Pacemaker". They make extractors for the S/6, and are compatable to multiple carbys. Part Number is PH2500.
But are they compatable with left hand drive? How about the 60-66 "A" bodies?
|
|
| Author: | Rick Covalt [ Fri Mar 02, 2007 11:37 am ] |
| Post subject: | No Pictures? |
Went to their web site and didn't see a picture of theirs either? Rick |
|
| Author: | Jeffc [ Sat Mar 10, 2007 11:31 pm ] |
| Post subject: | |
I talked to Harold this evening, he said that he was having problems with getting the slant header test fitted and the weather in Jan and Feb slowed things down a bit since it was too darn cool to be working in his unheated shop........ If you happend to agree to help with the test fitting and live close to him, get a hold of him...... he is building some stuff for me, so I'm waiting too....... |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|