| Slant Six Forum https://slantsix.org/forum/ |
|
| AFTER MARKET!connecting rods https://slantsix.org/forum/viewtopic.php?t=21603 |
Page 1 of 1 |
| Author: | Mister Twister [ Thu Jan 25, 2007 5:18 am ] |
| Post subject: | AFTER MARKET!connecting rods |
Looking for makers for my 225/ project thanks for any help you can give me http://www.stormcomm.net/donsduster.htm |
|
| Author: | Matadem [ Thu Jan 25, 2007 12:49 pm ] |
| Post subject: | |
cox bros about $1000 a set |
|
| Author: | Dave M [ Thu Jan 25, 2007 4:14 pm ] |
| Post subject: | |
Last set I bought was from Cunningham $1100.00 Any rod any lenght steel or titanium |
|
| Author: | Ron Parker [ Thu Jan 25, 2007 4:40 pm ] |
| Post subject: | |
Is this a bat out of hell Slant drag car if not why do you want custom rods. Thanks Ron Parker Bagels On Juice Im On Boost |
|
| Author: | Mister Twister [ Tue Jan 30, 2007 3:04 am ] |
| Post subject: | |
Quote: Is this a bat out of hell Slant drag car if not why do you want custom rods. Thanks Ron Parker
Hay Ron no just a weekender and local MOPAR shows have to keep up with dodgegirls v8 Twister mid 13 will be fine Bagels On Juice Im On Boost |
|
| Author: | Ron Parker [ Tue Jan 30, 2007 4:28 pm ] |
| Post subject: | |
Stock rods should be fine . Unless you are shooting at 400 or better horses. Bagel runs 198 rods on his juice bomber and has went 12.01 and had no rod isues. I run 198 rods and go like 12.50 and not a issue. Just have your machineist i think the term is to recondition them or refurbish them and you should be fine. Remember good parts in a engine will last longer and be more cost effect than cheap parts to do the same thing.Thanks Ron Parker Bagels On The Juice Im On Boost Bagels On The Juice Im On Boost |
|
| Author: | Mister Twister [ Sat Feb 03, 2007 3:20 am ] |
| Post subject: | |
Quote: Stock rods should be fine . Unless you are shooting at 400 or better horses. Bagel runs 198 rods on his juice bomber and has went 12.01 and had no rod isues. I run 198 rods and go like 12.50 and not a issue. Just have your machineist i think the term is to recondition them or refurbish them and you should be fine. Remember good parts in a engine will last longer and be more cost effect than cheap parts to do the same thing.Thanks Ron Parker
thanks Ron found 2 198 rods still need 4 more to get block together 225 RODS TO SHORT FOR THE PISTONS I GOT fla to cal not having to much luck any Ideeeeeas! Bagels On The Juice Im On Boost Bagels On The Juice Im On Boost |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|