| Slant Six Forum https://slantsix.org/forum/ |
|
| florida machine shop suggestions https://slantsix.org/forum/viewtopic.php?t=21648 |
Page 1 of 1 |
| Author: | Rick [ Mon Jan 29, 2007 7:28 am ] |
| Post subject: | florida machine shop suggestions |
Can anyone clue me in to a good machine shop in central or east central Florida? The machine shop I was going to use has apparently gone out of business. |
|
| Author: | eightymopar [ Mon Jan 29, 2007 7:48 am ] |
| Post subject: | |
where you at in central FL?? i know a good one in sebring where i am taking my slant six in. in highlands county. good work and good prices. |
|
| Author: | Bren67Cuda904 [ Mon Jan 29, 2007 8:31 am ] |
| Post subject: | |
I know a great one in Lakeland. Its half way between Orlando and Tampa. Well great I don't know yet. He is building my engine now and he seems very knowledgable. I've hungout at the shop on Monday mornings and it is very common to have customers coming in that have just won some race that weekend. Sometimes they even lap the field. Now I am no expert high preformance engine builder but I can see BS when its present. I don't see any BS here. |
|
| Author: | eightymopar [ Mon Jan 29, 2007 10:42 am ] |
| Post subject: | |
no $#!+ your from lakeland? what you got? man we should start a slant six club or somethin. i am right down on 27 south, about 45 minutes or so away from you in sebring. highlands couty. and i am often in the winter haven area. i like it better then highlands county 
|
|
| Author: | eightymopar [ Mon Jan 29, 2007 10:44 am ] |
| Post subject: | |
anyway to your question. i just dug up the number. if you live around here the place is called D+D auto in sebring. phone number 863-385-0191 |
|
| Author: | Slant Cecil [ Mon Jan 29, 2007 2:58 pm ] |
| Post subject: | |
The first two I used over the years were good, unfortunatly, both got job offers from the Nascar shops and left, one to Penske, the other to Petty. This has been a bit of a problem around here, Nascar shops getting a lot of good local talent. The third one I used was a known Mopar drag racer that held several records. Not to get into details, I'm not using him anyone. The one I will try next is a new shop, 'Heatbeat Racing', owned by Dave Hartman. It's in the Eustis area. I know people that have used him when he worked at another shop that. I happen to be going by there this week to drop off some parts to get machined. There may be a place closer to you. There are quite a few good shops around. It helps if you use one near you. If you are in the Melbourne area, look up Ben Donhoff. He has a shop but I'm not sure what the name of it is. Check the local Yellow Pages, pick a few out, then ask some of the local racers what they think. |
|
| Author: | Rick [ Tue Jan 30, 2007 7:57 am ] |
| Post subject: | |
Thanks for the tips. I'm in New Smyrna but I dont mind traveling if it means having work done by someone that know what he's doing. |
|
| Author: | Ron Parker [ Tue Jan 30, 2007 4:11 pm ] |
| Post subject: | |
give Charlie Schmid a blast or pm him he is at Ocala . He is a Slant Six Legend.  Thanks Ron ParkerBagels On The Juice Im On Boost |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|