Slant Six Forum
https://slantsix.org/forum/

Slanted Attitude Jaggers fabrication Dart
https://slantsix.org/forum/viewtopic.php?t=21737		 Page 1 of 4
Author:  Ron Parker [ Sat Feb 03, 2007 5:40 pm ]
Post subject:  Slanted Attitude Jaggers fabrication Dart
We are going to build a ground up turbo Slant Six to about 12 lbs of boost. This will be a presureized blow thru system on a Holly 4150 four barrel carb. Mr James Jaggers at Jaggers Fabrication will be our sponsor and we are going to do r/d work which will filter to street cars. We are fast tracking this project now and hope to have it going by May. Im excited about this project and look foward to It. James has a racing background and is a perfessional in fabrication. Look at that tig weld on his web site. Thanks and thanks for everybodys support. :D :D





Bagels On Juice Im On Boost
Author:  mpgmike [ Sat Feb 03, 2007 7:50 pm ]
Post subject: 
Good luck Ron. I know you'll keep us posted as usual.

Mike
Author:  Matt Cramer [ Sun Feb 04, 2007 5:19 am ]
Post subject: 
Good luck with this project! Are you planning on bringing it to Atlanta Dragway?
Author:  cmexlr8 [ Sun Feb 04, 2007 6:14 am ]
Post subject: 
Quote:
Good luck with this project! Are you planning on bringing it to Atlanta Dragway?
Or Brainerd! Hell I will pitch in on any work you guys need done - sweepin floors, handing wrenches - pretty much any grunt work that allows me to be in the vicinity!
Author:  Matadem [ Sun Feb 04, 2007 8:07 am ]
Post subject: 
8)

are you going to use a box or carb hat?
Author:  james jaggers [ Sun Feb 04, 2007 9:19 am ]
Post subject:  Hat
I am using a hat for my sons application.
Author:  Rob Simmons [ Sun Feb 04, 2007 12:23 pm ]
Post subject: 
Go Ron Go!! RPRacing has got a "Bamboozler" for sure!
Author:  slantzilla [ Sun Feb 04, 2007 1:23 pm ]
Post subject: 
You mean you may finally have a fast car Ol' buddy? :shock:
Author:  mrbillohnooo [ Sun Feb 04, 2007 1:56 pm ]
Post subject: 
Far out Ron!
Hope it all works out!....and come on now, it STILL wont be over when ya win!...LOL
Bill
Author:  Ron Parker [ Sun Feb 04, 2007 2:52 pm ]
Post subject: 
Its going to be a top hat design James can do that. We are in the process of maybe obtaining new forged 2.2 turbo pistons 1mm oversize for this project. This whole deal came together fast and I know I still wont have the fastest Slant Car The 69Dart is about as aero as a box of Bagels but i love that car. There is no virtue in a car it is just metal plastic rubber and what. But I dreamed of this all my life and it is coming true. My current goal is to do this project and then win another national championship. Because after all is said and done






It Aint Over Until I Win Thanks Ron Parker :D
Author:  james jaggers [ Sun Feb 04, 2007 7:20 pm ]
Post subject:  Headers
There will be a few days delay on the wastegate flanges. The man making my flanges cnc software crashed. I am starting on the headers tomorrow. I am hoping to have one of the headers built by the end of the week. I will keep the pictures posted on my website. You can make a slant six "GET IT". That's what my dad always said.
Author:  james jaggers [ Sat Feb 10, 2007 6:41 am ]
Post subject:  plasma cutter
The wastegate collectors came in and I started on the collector of the turbo header, but my plasma cutter took a dump on me. I will be posting some pictures tonight of what I have done so far. I hope to have a new plasma cutter before long. I will concentrate on the intake for now.
Author:  Todd360 [ Sat Feb 10, 2007 11:09 am ]
Post subject: 
Cool stuff!
Were the drag race pictures taken at Ohio Valley?
Thanks
Todd
Author:  james jaggers [ Sat Feb 10, 2007 2:07 pm ]
Post subject:  Pictures
Yes they were. If you live in southern Indiana you may know of a grey barracuda running around that is tubbed. I built the chassis and help build the engine. It hooks on the street great. He is not afraid to get it on blacktop. I will post some pictures of it on my website.
Author:  james jaggers [ Mon Feb 12, 2007 4:35 pm ]
Post subject:  INTAKE & HEADER
I will be back on the headers tomorrow. I am getting a different plasma cutter. I may start trying to make my own flanges. I have been paying set up fees for cnc machines to cut them and it is quit exspensive.
Page 1 of 4 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/