| Slant Six Forum https://slantsix.org/forum/ |
|
| Valve size https://slantsix.org/forum/viewtopic.php?t=22127 |
Page 1 of 1 |
| Author: | WILL'S74 [ Tue Mar 06, 2007 7:47 am ] |
| Post subject: | Valve size |
First let me tell you what I have done to the head so far. Street strip port and polish. Gasket mach intake and exghaust. Shaved head .050. The stock valves weren't in great shape can anybody recamend a good valve size if I was to upgrade. I have the K64-240-4 comp cam kit that came with timing chain valve springs and lifters. Any info would be great. |
|
| Author: | 72turboduster [ Wed Mar 07, 2007 9:07 pm ] |
| Post subject: | valve size |
well if u want good performance u will need to get the bowls opened up... the valves im using are out of a early small block ford they are a litle different in the lenght but if ur still running hydralic lifters they will adjust themselves |
|
| Author: | Doc [ Thu Mar 08, 2007 9:32 am ] |
| Post subject: | |
Are the valve guides in good condition or do they need replacing? A common size for 3/8 guides is 1.700 intake and 1.440 exhaust. DD |
|
| Author: | WILL'S74 [ Fri Mar 09, 2007 1:42 am ] |
| Post subject: | Valve guides |
Guides are good |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|