| Slant Six Forum https://slantsix.org/forum/ |
|
| head porting https://slantsix.org/forum/viewtopic.php?t=22223 |
Page 1 of 1 |
| Author: | icaneat50eggs [ Mon Mar 12, 2007 6:29 pm ] |
| Post subject: | head porting |
I cannot find the article for head porting, anyone know where? Thankyou. |
|
| Author: | icaneat50eggs [ Mon Mar 12, 2007 6:36 pm ] |
| Post subject: | |
O.K., I found it. Now do I want to remove metal around the valve opening UP to the part where the valve and valve seat seal? |
|
| Author: | 70valiant [ Tue Mar 13, 2007 4:03 am ] |
| Post subject: | |
Thats what I did. I used a dremmel with a tungsten carbide cutter. |
|
| Author: | slafolle [ Tue Mar 13, 2007 10:36 am ] |
| Post subject: | |
Quote: Now do I want to remove metal around the valve opening UP to the part where the valve and valve seat seal?
Yep, but be careful not to nick or otherwise damage the valve seat sealing area. I'd stay at least 1/8" away from it.Steve 1966 Dodge Dart GT |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|