Slant Six Forum
https://slantsix.org/forum/

Rear brakes for 8 3/4
https://slantsix.org/forum/viewtopic.php?t=2301		 Page 1 of 1
Author:  Charlie Schmid [ Tue Jun 19, 2001 11:11 am ]
Post subject:  Rear brakes for 8 3/4
I'm planning on putting an "A" body 8 3/4 rear under my 66 cuda. My problem is I have no brake drums or shoes. Can any one tell me what I need to ask for at the parts store? Such as year and model. The backing plates are for 10 inch brakes. Axel is 5 on 4 bolt pattern. Center register is about 2 1/4 inches. Thanks

Charlie

flturbo6@aol.com
Author:  dschumers [ Tue Jun 19, 2001 3:33 pm ]
Post subject:  Re: Rear brakes for 8 3/4
Quote:
: I'm planning on putting an "A" body 8
: 3/4 rear under my 66 cuda. My problem is I
: have no brake drums or shoes. Can any one
: tell me what I need to ask for at the parts
: store? Such as year and model. The backing
: plates are for 10 inch brakes. Axel is 5 on
: 4 bolt pattern. Center register is about 2
: 1/4 inches. Thanks
:
: Charlie


You should be able to ask for any '67-'72 A-body. Shoes should be 10"X1-3/4". I got my last set at NAPA.


aschumers@aol.com
Author:  matt [ Tue Jun 19, 2001 4:18 pm ]
Post subject:  Re: Rear brakes for 8 3/4
Quote:
: I'm planning on putting an "A" body 8
: 3/4 rear under my 66 cuda. My problem is I
: have no brake drums or shoes. Can any one
: tell me what I need to ask for at the parts
: store? Such as year and model. The backing
: plates are for 10 inch brakes. Axel is 5 on
: 4 bolt pattern. Center register is about 2
: 1/4 inches. Thanks
:
: Charlie


I have everything here on my garage floor for the 4" bolt circle 8-3/4. I'm going to rig up a rear disc setup, so I don't need the old drums. Everything is there, drums, backing plates, shoes, cylenders, parking brake cables, and a bunch of dirt.. Let me know if you're interested.. I'm in Southern CA...

matt-

jimyrigg@hotmail.com
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/